Posts

The decoration must be known: the bathroom waterproof process and precautions

The bathroom is the most humid place in the house. To prevent the seepage of the sanitary room wall and the ground is the problem we need to consider. BARANA brings detailed bathroom waterproof process and points for attention to show you. If there is any doubt about this, you must be sure to look at it carefully.

Brush the first waterproof coating: ensure that the construction site is clean and dry before construction. The waterproof coating should be covered with no omission. It is firmly combined with the base, without cracks, no bubbles and no shedding. The brush height is uniform and the thickness must meet the bathroom space requirements. Brush second times: pay attention to brush the first and second times waterproof paint need to have a certain time interval. After the first coating is dried, it can be carried out for second times. The specific time depends on the coating. The interval is too short, and the effect of waterproofing will be greatly reduced.

Protective coating for bathroom: to prevent the subsequent construction from damaging the waterproof layer, we need to lay a protective layer on the surface of the waterproof coating. The protective layer should be fully covered with waterproof layer. It is firmly combined with the base, no cracks, no bubbles and no shedding.
Bathroom closed water test: when the closed water test, the waterline at the highest point of the ground should not be lower than 2cm. Preservation for at least 24 hours. There is no leakage is observed. If there is leakage, it needs to be redone. This is very important and can not be ignored.

Bathroom treatment and cleaning at the grass-roots level, making leveling layer, bonding layer, detail additional layer, acrylic waterproof layer, water storage test, protective layer construction, and two water storage test.
Ensure that the bathroom floor is relatively stable: if you need to replace the floor tiles of the bathroom, after the original ceramic tiles are chipped away, First of all, we should use cement mortar to make the ground flat (especially the newly renovated house), and then do the waterproof treatment. Do this in that way can avoid leakage of waterproof coating due to uneven thickness or puncture of waterproofing membrane.

The joints should be brushed in place: the joints between the walls of the toilet and the ground and the joints between the upper and lower pipes and the ground are the most likely problems. Therefore, we must pay special attention to these parts. We must be careful in dealing with them. You can’t have the slightest carelessness in this bathroom space.
Wall processing is also very important: in order to achieve better waterproof effect, the general bathroom on the wall also should do about 30cm high waterproof treatment to prevent water accumulation to penetrate the wall. The wall adjacent to the bathtub is also higher than the height of the bathroom bathtub. The shower room is to reach the height of 180cm.

Waterproof test can not be omitted: after the waterproof construction is completed, all the sewers of the toilet should be blocked up for water injection test. After 24 hours of inspection, if there is no leakage on the walls and floors of the shower, the waterproof quality of the toilet is very good. On the other hand, we should find out the leakage and carry out maintenance. This step is especially important and can’t be ignored.
Keep the water flowing unobstructed: all the sewer pipes in the bathroom, including floor drain and sanitary pipes, must be kept unobstructed.

Bathroom decoration details in place, bathing out of the real ego

The bathroom is the second place in addition to the bedroom that lets us out and release ourselves. What details should we pay attention to in order to put up a beautiful and comfortable bathroom? Most bathroom areas are divided into wash area, shower area and toilet area. The location needs to be determined according to the size of the bathroom space. Before the bathroom decoration, it is necessary to have a rough layout plan, otherwise the size of the sanitary ware product is very difficult to handle.

Most of the bathroom area planning is not big, but want to place a lot of things. At this time, you can design a group of wall-hang bathroom cabinets above the toilet, and design a wall mounted small locker above the washing table. Below can also design some receiving cabinet, can also carry on the hollowing treatment to the wall surface, post the floor tile, can form a shelving table, save place to put the bathroom sanitary wares, vacate a lot of space to collect.

Bathroom in the architectural design of the design of the toilet has been arranged in the water position, unless the position is not enough or the design is not reasonable, otherwise it is not appropriate to move and change easily, otherwise the project is not only large, but also the decoration technology is not in place, easy to leave a lot of hidden water hidden danger.

In order to prevent water from soaking through the wall, resulting in moldy walls, the renovation of bathroom decoration, the ground should be fully waterproof. When laying waterproof layer, it should be above 20 cm above the wall and at least not below the threshold height. When the floor has reserved pipes, the waterproof layer must also be wrapped with reserved pipes. After the floor waterproofing is done well, it is necessary to immediately use cement mortar to make bottoming or make protective measures to prevent the waterproofing layer from being damaged.

If the bathroom is not installed in the bathroom, the bad gas and moisture in the bathroom can not be discharged outside. It is still just in the bathroom or is a continuous circulation in the room, which is not conducive to the health of the home air environment. With the exhaust system, the water vapor quickly disperses after shower, which helps protect the washing machine and bathroom cabinet.

It is often heard that there are shower room, glass basin and other exploding incidents. This is mainly related to the quality of the glass used. Good tempered glass is generally hard to break and does not hurt when broken. The eyesight of purchasing is very important at this time, so it requires a lot of effort.

Many people have done a lot of measures for the odour of the ground leakage, but we should know that the most direct way to prevent odor is to cut off. The more you take measures, the slower the water speed is. For the future water consideration, it is recommended to choose a good odour floor leak. The bathroom floor often has water supply. Ordinary tiles are easy to slip over. Especially for families with old people and children, we should pay more attention to this problem. Therefore, we must pay attention to the skid resistance when choosing the floor tiles for the bathroom. Although the price is more expensive, it is the safety and health of the family when they use it.

Bathing at home has become the habit of most people, but usually the bathroom is not a warm place, especially in winter, the temperature difference is very easy for people to get sick. Therefore, heating equipment such as floor heating, heat sink, bath bully and so on is also an indispensable item in bathroom. And the type of product should be determined according to the specific circumstances. As space expands and functions increase, more and more electrical appliances in bathroom are also available. Many families are equipped with intelligent toilet, bath room, massage bathtub, multifunctional bathroom cabinet and other audio-visual equipment such as sanitary ware, TV or stereo. When the budget is limited, it is possible to reserve the sockets first so as not to trouble the wiring again in the future.

A fantastic ideas can make bathroom decoration requires to more comfortable and perfect effect

We want to break the conventional design of bathroom decoration. The family bathroom decoration effect has both the comfort of the hotel and the perfect feeling of family decoration. Home bathroom is also the most worthy of our creation, through a little wonder, bathroom can become a style inside and outside, farewell monotonous and dull, to meet the distinctive personality bathrooms space.

Creativity and personality. Because bathroom area is limited, so relaxed and simple design style is liked by many people. In general, designers will use rectangular mirrors on the top and wall of the room to enhance the penetration of the room. In the other side of the wall from the bottom to the top of the wall paste colored tiles, shower area and wash area with glass, white tiles, bathroom cabinet, color “wall” and the mirror and light, bathroom is not only refreshing, but also fashionable avant-garde. Some personality designers do not match the color, but choose the full – Caffeine mosaic of the bathroom to carry out full package of bathroom, not only the ground, wall, even the skirt of the bathtub on the whole package of mosaic, perhaps early into the room, feel a little depressed, but more cool people. If you think the whole coffee color is too dull, you can also use the “step by step” type of placement method, transition color.

Retro bathroom design. The smooth and smooth appearance, the color and luster of the visual effect, these are the benefits of stone cast baths, very consistent with the requirements of literary and artistic youth. At the same time, it is also very convenient and convenient in anti fouling and cleaning. The most important thing is that its life is long enough. And through the windows, you can enjoy the beautiful scenery of nature.

The claw bathtub with the bar is very pleasant. The style is well designed, and decorating is also crucial: hanging small makeup boxes can put some small items in common use. Metal rings and poles can be inserted into the wall to store towels and toilet paper. Transparent soap boxes, toothcups and so on are directly absorbed on the wall by suction heads, so that it is convenient to change positions at will. The rattan basket can be hung on the side of the bathtub, with bath salts, aromatherapy oil and flowers.

The most potential is the toilet, when others are not white or ivory, do not want ordinary you, whether to break this stuffy Bureau, a colourful change of the body? Small flowers, cartoon characters and cute animal shapes can be used to decorate bathroom. In addition, make a small bar on the edge of the bathtub faucet. When you soak in the bathtub, and the wine with your hands. Is it very comfortable? The bar at home should be used for oneself. It is the leisure space in the family. It should not be kept in the living room. Bathing in a bathtub is the most relaxing time for a person. It is also the most suitable place for bars.

European style classical bathroom design. The European style bathroom design is a consistent and elegant and luxurious route, and the mosaic of big color mosaic tiles can change the different styles in the ingenious combination of light and shadow. The big bathtub edge creates a romantic atmosphere with candles, and the rose petals reveal the women’s love for romance. Functional double hand basin. In the bathroom the most secretive space in home life, the basin’s insignificant role can affect your day’s life. In the early morning, dressing up and dressing up here makes the mood cheerful and confident. At night, I wash away my fatigue and relax my body and mind for a whole day. Therefore, the selection of a love basin is an important part of the decoration of new homes.

Five details need to be mastered in the bathroom decoration

In the people’s home life, there can be no books and restaurants, but there must be a place where there must be a toilet. To know the role of the toilet in a family is still large, it brings great convenience to people’s life.

When the bathroom is decorated, its drainage and ventilation is the first consideration. If it is not handled well in the decoration, it will bring you a lot of inconvenience in the future use, and it always feels that there is a feeling of smell. There also will be a lot of problems in the drainage. Drainage, the installation of ground leakage must be lower than the ground 10mm, leaving a inclined angle, so that the design is more reasonable, and the hole aperture of the ground drain grate should be controlled between 6mm–8mm, so that the hair, sand and soil will be prevented from entering. Ventilation, if the toilet does not have windows, then it is necessary to install an exhaust fan to carry out the exhaust, and to keep the bathroom cabinet dry.

Bathrooms is a relatively damp place, so when you choose materials, you need to spend a little more effort. For example, we should choose more anticorrosive, anti rust and waterproof materials. In addition, it is also necessary to take into account its permeability, especially the ceiling of the toilet, which must be selected which is breathable and moisture resistant material, or it is not easy to make these materials deteriorating and rotting.

The use rate between bathroom is also high, and it is also a multi-functional place, although the space is not large, but the toilet, bathing, wash, laundry and so on are not less. Therefore, a healthy and reasonable design space is still very important, we must choose a reasonable talent, so as to make the spatial distribution better. The height of bathroom fittings is also suitable. Generally speaking, this height is not uniform. It can only be said that it varies from person to person. Generally speaking, the height of shower heads is between 205-210 cm, the height of the basin is between 70-74 cm, and the width should not be less than 50 cm. The height of the bathroom mirror should not be less than 90 cm, and the top should not exceed 200 cm. You can install this height when you install it. There is also a washing machine’s width should not be less than 35 centimeters.

Bathroom first gives a person is a kind of damp and dark feeling, the local feeling is stronger, so the color of the toilet must be selected well, it is better not to choose the dark color, as far as possible to choose the elegant and fresh color, for example, like blue. I believe you have heard that blue can enhance the mystery and privacy of bathroom. At the same time, it is also good to put some green plants in the shower, which makes the space more vivid and able to get rid of the gloom.

whats the best distance between shower and faucet

What’s The Best Distance Between Shower And Faucet?

whats the best distance between shower and faucet

Shower head distance: space height

In determining the distance between shower and when first according to the self home space pattern to determine which items, the first thing to note is the height of the space. According to the spatial pattern of different sizes in the distance control are also different, the need for decoration friends to make on-the-spot investigation, according to the height control needs to design, to ensure the normal use.

Distance between shower and faucet – human needs

The main distance between shower head and faucet is to combine with the owner’s self use needs to consider, and in line with human engineering. From the perspective of decoration design is now generally, between shower and leading about 90-100 cm in height is almost, according to the owner’s demand can be properly adjusted, but the rate is not too big, try to use self protection.

Shower head distance: design style

According to the design style of shower itself is different, in fact, in the location of reservations, there will be some differences, users need to do a good job first overall consideration, combined with the beauty of decorative design to consider. From the design point of view, shower as much as possible with their bathroom decoration style consistent with, so as to form a good use of feelings.

Distance between shower head and faucet pipe distribution

In considering the shower and the leading distance must be according to the distribution of the pipeline to consider, such as the distance between the hot and cold water at about 15 cm, with self home pipeline distribution and design are different, appropriately adjust the distance. At the same time, it can be combined with the design of the bathroom and so on. It can reduce many problems.

how to choose shower

How To Choose Shower

how to choose shower

First, see whether the surface coating is smooth and smooth.
Generally speaking, from the surface of the shower, the naked eye can see the more bright and delicate, the better the plating process.

Two, look at the merits of the material.
Most of the plastic used for ordinary showers, high-quality showers generally use copper tube, copper pipe percussion sound crisp, cast iron pipe sound muffled. Or you can hold the tube 2, 3 seconds after the release, such as pipe body mist lingering, it is very likely that the cast iron pipe, if left hand tube almost no change, basically you can determine copper.

Three, look at the shower switch spool material and service life.
Quality shower switch valve core is made by special process, high hardness ceramic made, the service life to meet the national standard of 200 thousand times.

Four, look at the sprinkler function.
Many showers in addition to a variety of water functions, there are energy-saving, self-cleaning, constant water temperature and other diversified functions, and some showers there are multiple sprinklers. According to the actual situation of their own, select the right function, the less function, of course, the lower the price.

Five, look at the intensity of irrigation.
This should be based on their own water pressure, and if the house adopts water tower and other equipment, the water pressure is low, low pressure sprinkler should be used to ensure that in low pressure circumstances, the sprinkler water has a certain degree of irrigation. Of course, under normal circumstances, the water pressure less than 1.5 kilograms in the most suitable shower use will cause pressure, water pressure is too small a shower, the shower can not be used normally.

is it difficult to install sprinkler What are the problems that need to be noticed

Is It Difficult To Install Sprinkler? What Are The Problems That Need To Be Noticed?

is it difficult to install sprinkler What are the problems that need to be noticed

Sprinkler installation, first determine the location of the sprinkler

The first thing to do is to determine the location of the sprinkler. Generally speaking, the staff will be responsible for the installation. For buyers, the need to pay attention to the question is whether the placement of sprinkler meets the needs of space, as well as the bath to bring the greatest convenience. This location includes some items in the bathroom and so on.

Sprinkler installation, and secondly, should determine the height of sprinkler installation

The position relative to the sprinkler, sprinkler installation height seems to be more important in the shower installation diagram we know, we must first determine the installation shower shower is high, especially the height of the nozzle, if it is too high, it will cause some pressure, if too low, then the temperature control is not good, but also a some of the security risks. Therefore, the installation of sprinkler, should also pay attention to the overall height of a choice.

What are the precautions for sprinkler installation?

In fact, for the sprinkler installation diagram, we still need to pay attention to many places, one is that those parts are installed before the main frame, should talk about some special parts for processing. In addition, when installing, should pay special attention to each screw must be tightened. Of course, the sprinkler installation should also pay attention to cleaning up in time.