How does the bathroom be anti-seepage and mildew?

/in /by

The walls of the bathroom are mostly paved with tiles. In order to keep them clean and bright, you can use multifunctional decontamination cream to clean them. As for bathroom tiles crevice, first use toothbrush to dip a little decontamination cream to remove dirt, then brush with a brush at the gap. This can not only prevent seepage, but also prevent the growth of mould.

A clever way to clean the bathroom glass basin. The glossy mirror and windows will be blurred because of their close contact with water for a long time. A spray type glass basin cleaner can be used to spray a large X shape on a whole glass, then fold the dry rags and wipe one round in one direction until the glass seven points dry, then wipe it again with a dry cloth. It can also be wiped with old newspapers. The ink of paper can make the glass shine as early as possible and wipe away stubborn dirt.

The faucet is perfectly change cloth. Water faucets often dip into various baths, shampoos, and detergent, which will make the surface of the faucet chrome plated. You can spray neutral deter gent on soft cloth and gently wipe the faucet once a week. Do not use acid or abrasive cleaners or wire brushes to “torture” faucets.

Make a whitening mask for the toilet. First, put a proper amount of water in the toilet, rinse the toilet brush again, then pour about 5~10 milliliters of detergent or hydroelectric acid, then wash it evenly with a brush, if the dirt is heavy, then a little detergent can be soaked and washed until clean, then rinse with clean water.

Bathroom ceramics are as bright as new. There is also a convenient and environmentally friendly way to clean sanitary ware, which is white vinegar and lemon peel. First, clean the dirt on the surface of the sanitary ware, then dip the soft cloth into a little white vinegar to wipe the surface of the sanitary ware or wipe with the lemon peel. Only a little time, the clean will be bright as new, and it will send out the fragrance.

Create a “oxygen bar” in the room. Today, “negative ion” air, you can keep some of the shade of plants, you can also buy a kind of oxygen bar, an oxygen bar similar to the murals can play the role of fresh air and plants, and do not take care, but also decorate the bathroom room, let the bathroom room “oxygen bar”, you may try.

Create an elegant fragrance. There are many kinds of air fresheners on the market, you can choose according to your own preferences. When using the bathroom in the elegant fragrance atmosphere, the music will be relaxed and comfortable at the same time. The simplest way to clean bathroom air is to put a cup of vinegar or a box of cool oil in the bathroom, and the smell will disappear.

How much space is it enough for the bathroom?

/in /by

Bathroom function is most people choose room and decoration easily overlooked part, a suite should design several bathroom accessories, I am afraid the opinion is more difficult to unify. A room with a bathroom cabinet is absolutely genuine local tyrant. For most people, what kind of bathroom ideas is the most reasonable?

At present, the design of commercial housing, less than 90 square meters of small space more than a bathroom , 90-140 square meters of large and medium-space basically two bathroom,main bathroom +guest bathroom. Toilet mainly put three pieces of sanitary ware, that is, wash basin, toilet and bathtub or shower, so it should be more than 3 types. Otherwise, it will be inconvenient for people to turn in the inside.

In the bathroom tiles setting, if it is a bathroom  with a bathtub, the net width of the toilet should not be less than 1.6 meters; if it is a shower toilet, the net width should not be less than 1.2 meters. However, is the bathroom adequate for these designs enough? It is still not enough.

According to the three room of 120 square meters, if two generations live, most of them are four families, and three generations are at least five. Look at what functions as a “qualified”  bathroom bathtub : hand washing basin, bathroom cabinet, toilet, shower room, laundry, make-up table, and storage box. A bathroom actually needs to bear so many functions. We have to do so many things in the bathroom.

Two bathroom can do so many things, in fact, it is not enough, or will “crash”. When more and more people realized this, housing decoration began to introduce the concept of “dry and wet separation”. After the dry and wet separation bathroom is renovated, the “dry area” is used for daily washing, storing and washing, and the “wet area” is used for bath shower and going to the toilet.

This design can make the bathroom meet the different needs of the two parties in the same period, and solve the problem of “crash” in the bathroom to a certain extent. Bath shower, wash basin, toilet, wash clothes are all in a large bathroom, but they can be used at the same time, do not interfere with each other, a bathroom can allow four people at the same time.

Apart from the design of bathroom area and functional area, its distribution is also very particular. The bathroom should be adjacent to the bedroom, and the door should not be right to the living room. If the bathroom is directly facing the living room, the front room should be set in the toilet, and the washing machine can be placed in the front room. And most importantly, the size of the bathroom should be consistent with the area standard of the whole building.

Beautiful and clean coexist, bathroom floor tile selection and purchase skills.

/in /by

In the bathroom, the home environment is very special. The bathroom floor is bathed in water almost every day, and the moisture is very heavy. So, when doing home decoration, what floor tiles are in the bathroom?

Generally, the mosaic tiles with high quality have low water absorption rate, so that they can quickly dry. If the floor tiles does not indicate the water absorption rate, the tea or water drops can be used on the back of the tiles, and the diffusion degree of the water drops will be inspected a few minutes later, the less water absorbs, which means that the water absorption rate is low and the quality is better.

After heat expansion and contraction, the medallion tiles with high water absorption rate will cause the crack of the tiles surface and the whole wall floor tiles, and the decoration of the northern area bathroom in the four seasons is more important to pay attention to this problem.

 

When choosing bathroom floor tiles with high texture density, when choosing tiles, you can observe whether the tiles surface is smooth, and whether there are pinholes of uneven thickness. At the same time, you can knock the tiles to hear whether the voice is crisp, which indicates that the has high density and good hardness. Such bathroom cabinet are laid in bathroom space, it is not easy to damage, but also easy to maintain and clean.

The choice between the shower, toilet and the basin is dry and wet. It can be well divided by different materials and varieties of bathroom basin, so that they can not interfere with each other, avoid the past kind of splash. This is one of the most common decoration methods in foreign countries.

The color of toilet is first selected according to the overall style of the bathroom, followed by the color that one likes. For most of the small space bathroom, the color of bathroom tiles is the best choice for light colored tiles, not black or dark. Light color can reflect the effect of sight from the light, making the bathroom look more spacious and bright. When choosing bathroom tiles, place tiles on the same color and pattern from outside 0.8m.

Bathroom floor tile specifications are more common size 300mm*300mm, bathtub water absorption rate is generally around 1%. The decoration materials for the wall and floor of the bathroom are glazed tiles,polished tiles and mosaic tiles. The specifications for bara tiles are 300 x 300mm and 330 x 330mm. The bathroom space is smaller than the living space, and the corners are many. Try not to use the large marble porcelain tiles. Because big size tiles cutting frequency is high, the waste is bigger, also does not suit the floor drain, the inconvenient ground leveling, causes the waste.

When choosing shower tray, it can be identified by judging the thickness of glaze layer on tiles. The surface of the polished tiles can be scratched with hard objects. If there is scratch, it means that the glaze is not enough. When the thin glaze layer on the tile surface is polished, the tiles surface will be easy to store dirt, and it is difficult to clean up and lack safety. And some floor tiles which no glazed, generally unsuitable for a wet and closed environment, because the pores on the tiles can not absorb water and can not be diverged, and can also lead to the appearance of mould.

Make Japanese style decoration simple style bathroom space

/in /by

Living in a noisy city, it is inevitable to yearn for fresh and natural living environment. The decoration of bathroom with small apartments is also a key point for rational planning and storage. The light and simple and generous furnishings of the Japanese style decoration, with the elegant design of the bathroom sanitary wares, add some fresh to the home, as if to bring people back to the pastoral life and feel a warm and comfortable life.

The simple Japanese style bathroom, with the main tone of the wood color, combined with the use of mosaic and the green ornament, adds a few fresh feelings to the bathroom. The white wash basin and the original wood feel the bathroom cabinet, with the pure white light, let the interior as a whole emit a soft temperament.

 

Small space bathroom is small, but the simplest design can also highlight the simplicity of the whole, the metope of diatom mud can help indoor humidity and taste, and the bathroom is rich in the bathroom. And the unique ceiling lamp in bathroom also makes the bathroom feel glossy and shiny.

The bath shower is an essential part of life in Japan, so the choice of bathtub is also very important to them. The round warm color light bulb is coloured with dark wall, so that every part of the wall is clearly visible, and it also highlights the clean and tidy interior.

Use white as the keynote of bathroom, clean and generous. Use colored tiles as decorations on the partition to make the space more artistic. Transparent glass has been placed as an item placing bar, and daily necessities can be placed at will, neat and convenient to clean up. The oval antique mirror brings the old flavor.

The bottom of the wash basin and the partition board create two storage materials, the bamboo basket is used to place the smaller daily necessities. The lower space can be placed in the garbage bin or the large collector basket. On the left hand side of the washing basin is a simple towel hanger, which makes the bathroom in good order. A small bookshelf made of wood at the corner is simple and novel.

 

Japanese style decoration is in simple and Zen. The simplest white collocation of raw wood texture often brings the best explanation to the fresh decoration style. Although the bathroom is small, it can also add a lot of clean sense to the whole by meticulous decoration, so that the interior is more clean and orderly.

 

How to make rational use of the bathroom decoration budget?

/in /by

Before bathroom decoration, I believe that many people will make a budget to prevent overspending and save some decoration fees. But for functional bathroom, many places can not be saved, if it is omitted, it is easy to leave many hidden dangers.

Water and electricity do not do well, the decoration is equal to zero. Bathroom is a place where multiple water and electricity are collected. If there are problems of design and selection, the leakage of water leakage is caused by the design and selection. The cost of reworking is not a small amount. Therefore, the quality of good water pipes, wires and wires should be selected in the early stage, and the wiring must comply with the regulations.

The waterproofing in the bathroom is also very important. Not only is the material good, but it also needs to be painted in accordance with the requirements. Generally, the surface waterproofing should be brushed two times and carried out the 24 hours closed water test, and the wall waterproofing must be 180cm height. The waterproof of corner and water pipe should be careful. This is the easiest problem.

The use of sanitary ware is high, and it seldom changes after installation. Therefore, the quality of the product must be better. Otherwise, there will be problems at all times. It will not only repair trouble, but also lead to leakage, difficult cleaning, and no use. The selection of faucet and hose is very important. If you choose it, you have to replace it frequently.

Floor drain and ceiling lamp are commonly used but not noticeable objects in bathroom. Their quality also directly affects everyone’s normal life. If the floor drain is not properly selected, it will lead to poor drainage or return to the water. If the ordinary lamp is wet, it will not be lighted. Therefore, the ceiling lamp must be moisture-proof.

Clever use of light can change the sense of space very well. Bright lighting can make people feel the improvement of space, and dim light will make people feel that space is narrow and uncomfortable. The lighting of second-hand houses is usually not very good. Therefore, to create a sense of space, we first need to start with the bathroom decoration tips and lighting. The lighting of second-hand houses is usually not very good. Therefore, to create a sense of space, we first need to start with the bathroom decoration tips and lighting.

Good layout can increase the utilization rate of space, which is more important for small second-hand housing bathroom. For the 4 square meters bathroom, the most important thing is to arrange the basin, toilet and shower reasonably. The basic layout method of “three big parts” is set from low to high: that is, starting from the bathroom door, and gradually deepening. Among them, the most ideal layout is the washing table to the bathroom door, while the bathroom closes on its side, and the shower room is set at the inside end.

Chinese people have always been fastidious about the square pattern of residence, so people are accustomed to the vertical thinking way of horizontal flat. It is thought that next to the wall, the space can make the space compact, but it often ignores the design of the corner of the room. Reasonable planning of bathroom corner space can not only maximize its utilization value, but also enhance the artistry of the whole home environment. Most suitable for arranging some functional areas, such as wash basin, toilet and bathroom cabinet.

The selection of the bathroom cabinet and the details of the bathroom decoration

/in /by

In the bathroom, it is a small branch in the architecture system, which is often ignored. Our attention to its functionality is often far greater than its decoration and space design. Because whether we go to the toilet or bathing, the first requirement for bathroom is not clean. Not big? Do you sit in a toilet or a squat? The bathroom is not big. Do you have a bathtub? Besides, it seems that there are no other concerns.

Bathroom not only refers to toilets, but toilets, toilets, baths. According to the layout, toilets can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi open, open and closed. The space between the bathroom will not be very large, and the utilization rate of light will be very large in this narrow space. Bathroom lighting brightness is not very high, too high brightness will easily glare through the mirror to form glare. The cool and shades of lamps that can increase the sense of space should be the best choice.

The bathroom lighting design consists of two parts, one bathroom part and one bathroom section. The bathroom space is dominated by soft light. The demand for illumination is not high, and the light is uniform. The light source itself also has waterproof function, heat dissipation function and not easy water accumulation structure. The general light source is designed in smallpox and walls. In fact, in a lot of cases, the light in the bathroom with the top of the bathroom is darker than the ideal illumination. The bathing bully is not suitable for the bathroom lighting because of the strong light and heat. There should be a special lighting source to solve the problem.

Because of the cosmetic function requirements, the bathroom has higher requirements for the color rendering index of light source. Generally, the high-grade light source with good color rendering is required. The control degree and the angle of light are also higher. It’s best to be on both sides of the makeup area, followed by the top. It is also relative to the brightness of incandescent lamps above 60W. At the same time, in this part of the use of light source is more lively, LED lights, chandeliers and so on in this space will be more useful.

The material of the bathtub is acrylic, cast iron, and steel plate. Acrylic material is now the mainstream, acrylic bathtub is 3-5MM acrylic plate vacuum molding, back coated multilayer glass fiber, good insulation effect, smooth surface clean clean decontamination, the price is moderate. Cast iron bathtub is very heavy, durable, long service life and high price. Strong, wearable, high flatness, smooth glaze, lower price relative to cast iron bathtub. No matter what kind of material of the bathtub to drain the drainage is a good match before the factory, this part is easy to be ignored and the most easily out of the problem. When buying, you must try the drain valve on the spot and operate several times to check whether the switch is sensitive and reliable.

Whether the faucet is plated with copper is usually heavier with copper material. The “heart” of the faucet determines the life of the faucet and the effect of water. It is better to use ceramic spool. The water outlet of the general tap is covered with a rectifying net cover, and a good tap outlet has a double-layer filter screen, which makes the water smooth and smooth without splashing and bubbles, and saves water by 30%. The plating layer can not be maintained for a long time without special maintenance. Good plating has 3 layers, good static surface effect, and guarantees that life will not fall off.

The bathroom space is well arranged, and the dry and wet separation is in order.

/in /by

In the functional areas such as living room, bedroom and kitchen, the bathroom area is relatively small. Although the area is not large, but the bathroom is a lot of things to receive, so in the premise of not affecting the use of sanitary ware, how to reasonably plan the bathroom space is a big test.

It is a thorny problem how to accommodate small apartment bathroom and how to meet many needs in limited space. The shower room is partied by glass, and the wall between the washing table and the washing table just takes out a layer of storage to provide enough space. This design also applies to the top of the toilet or the space above the bathtub.

Glass partition in the whole bathroom space is fully used, both sides of the symmetrical reception desk, shower room in the middle, the ground is also different from the dry areas on both sides, very good to meet the requirements of the wet area. The nostalgic ceramic houses, the whole space is covered with cement colored tiles, and the ground is properly matched with mosaic tiles of the same color system.

The rear space designed a rectangular shower room, half of the partition wall with glass will dry and wet separation, corner position left to the absorption basin, hanging style occupies a very small space, the whole looks very harmonious. Although the bathroom space is a square space, but in the design of the deliberate on the ground in the irregular division, triangle paved out a dry wash basin table space, placed in the middle direction.

The diversity of colors makes the characteristics of the whole space immediately reflect, and the cobblestone intermingled with the floor. It plays a good role in space division. Dark bathroom furniture and half face coloured wall with light floor and shower room, each functional area of the space is very clear distinction. A hard – style bathroom space. The shower room is separated by half wall, and the warm yellow light on it becomes the only bright color in the whole space. There is an embedded shelf space in the next corner, so there is no need to worry about the reception.

A large floor window was opened on the solid wall of the bathroom. The bathtub was placed in front of the bathroom. The washing table, bathtub and shower room were connected by the three. The dark space with the transparent gold shower room, imitating the natural rainforest, efficient water saving 30%, enjoy the bath feeling, the water is gentle, the shower experience, the whole space gives people elegant, warm feeling.

The wall next to the bathtub is both the background wall and the partition wall, the corner leaves the space for the toilet, the other side is given the shower room, the interior design is added with the glass door, and the dual insurance is very good dry and wet separation design.

Although the bathroom is small, the sense of fashion can not be less.

/in /by

In the bathroom, it is a small branch in the architecture system, which is often ignored. Our attention to its functionality is often far greater than its decoration and space design. Because whether we go to the toilet or bathing, the first requirement for bathroom is not clean. Not big? Do you sit in a toilet or a squat? The bathroom is not big. Do you have a bathtub? Besides, it seems that there are no other concerns.

Bathroom not only refers to toilets, but toilets, toilets, baths. According to the layout, toilets can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi open, open and closed. The space between the bathroom will not be very large, and the utilization rate of light will be very large in this narrow space. Bathroom lighting brightness is not very high, too high brightness will easily glare through the mirror to form glare. The cool and shades of lamps that can increase the sense of space should be the best choice.

The bathroom lighting design consists of two parts, one bathroom part and one bathroom section. The bathroom space is dominated by soft light. The demand for illumination is not high, and the light is uniform. The light source itself also has waterproof function, heat dissipation function and not easy water accumulation structure. The general light source is designed in smallpox and walls. In fact, in a lot of cases, the light in the bathroom with the top of the bathroom is darker than the ideal illumination. The bathing bully is not suitable for the bathroom lighting because of the strong light and heat. There should be a special lighting source to solve the problem.

Because of the cosmetic function requirements, the bathroom has higher requirements for the color rendering index of light source. Generally, the high-grade light source with good color rendering is required. The control degree and the angle of light are also higher. It’s best to be on both sides of the makeup area, followed by the top. It is also relative to the brightness of incandescent lamps above 60W. At the same time, in this part of the use of light source is more lively, LED lights, chandeliers and so on in this space will be more useful.

The material of the bathtub is acrylic, cast iron, and steel plate. Acrylic material is now the mainstream, acrylic bathtub is 3-5MM acrylic plate vacuum molding, back coated multilayer glass fiber, good insulation effect, smooth surface clean clean decontamination, the price is moderate. Cast iron bathtub is very heavy, durable, long service life and high price. Strong, wearable, high flatness, smooth glaze, lower price relative to cast iron bathtub. No matter what kind of material of the bathtub to drain the drainage is a good match before the factory, this part is easy to be ignored and the most easily out of the problem. When buying, you must try the drain valve on the spot and operate several times to check whether the switch is sensitive and reliable.

Whether the faucet is plated with copper is usually heavier with copper material. The “heart” of the faucet determines the life of the faucet and the effect of water. It is better to use ceramic spool. The water outlet of the general tap is covered with a rectifying net cover, and a good tap outlet has a double-layer filter screen, which makes the water smooth and smooth without splashing and bubbles, and saves water by 30%. The plating layer can not be maintained for a long time without special maintenance. Good plating has 3 layers, good static surface effect, and guarantees that life will not fall off.

How do I choose the bathroom? BARANA tells you.

/in /by

The bathroom is a form of expression that best reflects the master’s artistic taste. With the development of society, the progress of science and technology and the improvement of people’s aesthetic ideas, the toilet has also become a fashion theme in the family decoration. Through the collocation of various products, the artistic taste of every family, the status of the master and the space of the modern elegant life are reflected.

Apart from considering the size, style and color of the bathroom cabinet, the following factors should be considered: moisture-proof, waterproof and moth proofing. The quality of materials directly affects the quality of products, preferably with moisture-proof materials. BARANA multi-storey solid wood board has good structural stability, is not easy to deform, and green environmental protection, environmental protection grade reaches E0 level.

The higher the glossiness of the toilet, the higher the density is, the easier it is to clean. The quality of porcelain is directly related to the life of the toilet. The higher the firing temperature is, the better the quality of porcelain is. The flushing performance of the toilet depends directly on the design of the pipeline, and is also related to the height of the water tank and the water parts. Modern popular flushing methods toilet include direct impact, siphon type and so on. The straight pipe has large diameter and strong flushing. The siphon toilet is due to the pressure difference, which causes the liquid to flow from a high pressure water level to a low pressure level and full of siphons. The noise of the flush is small.

The quality of the water determines whether the toilet is used normally, and more than 90% of the problems appear on the water parts. It is necessary to check the water parts carefully when buying. It is best to install it before the factory comes out, see whether the structure is compact, whether the active connection is sensitive and reliable, and whether the sealing water part is smooth. In line with the concept of water-saving and environmental protection, 6 liters of flushing is a trend, 3/6 up to two stalls, good results.

The wheel base of shower room pulley should use materials that are resistant to compression and heavy resistance, such as 304 stainless steel and high-end synthetic materials. The bearing has good sealing performance, water vapor is not easy to enter the wheel, and the smoothness of the wheels is guaranteed. The pulley and the track should be closely integrated and the gap is small, so it is not easy to fall off when external force is struck, avoiding safety accidents.

Related to glass material, can be divided into ordinary glass and tempered glass, ordinary glass is cheap to use unsafe, now more use of toughened glass, according to national standard safety steel glass per 50*50mm area to reach more than 60 pieces. 3C marks are generally certified on a safe glass. 3C certification is the abbreviation of China compulsory product certification. Shower room without this logo can not be sold. The pull rod of shower room is an important support to ensure the stability of Frameless Shower room. The hardness and intensity of the pull rod are important guarantee for the impact resistance of Shower room. It is recommended not to use a stretchable pull rod, but its strength is weak.

It is often necessary to support the weight of tens of kilograms of glass. If the hardness and thickness are not enough, the service life of the shower room will be very short. Check to see if the surface of aluminum is smooth, whether there is chromatic aberration and trachoma, and section finish. When used for waste aluminum, the smoothness of the surface treatment is not enough, there will be obvious chromatic aberration and sand holes, and the smoothness of the section will be dim.

Now the bathroom is to a kind of noble, elegant style change, the popular thing is not necessarily good, the rapid rise of the avant-garde often, for durable consumer goods is out of date and disappear with the product. And the personality and the classic brand, often have a profound cultural background, its elegant taste, unique, combined with the characteristics of the times and traditional culture, creating a very strong cultural products. BARANA, with bathroom furniture as the soul, is committed to creating a fashion, comfortable and friendly living space for more people and becoming a continuing leader in the classic fashion home bathroom.

Why are the toilets made of ceramics?

/in /by

We have been sitting in the same toilet (or squatting on the same squat toilet for centuries). Sewage pipes are almost hidden from the past, and the seats of toilets are also made in various styles, using different materials. But for the toilet, the material has almost never changed since it was invented for hundreds of years, almost use porcelain materials.

But why don’t we replace it with modern synthetic materials? Technology is so developed that we must have better materials than porcelain, with a better appearance and no peculiar smell. But we really don’t have a better material than porcelain. Toilets need to have the following three abilities: First, it must be a flushing machine. Second, it must be waterproof, clean, and hygienic. In the end, it must be strong. Because people are sitting on the toilet, and some people are very heavy. And porcelain, has met the above three requirements.

For most users, toilets must be a very effective waste cleaner. The toilet design is very complex. Water tanks, valves, overflow pipes and sewage pipes are all very fine. It contains a lot of intricate engineering applications. Glass like ceramic toilet is made of clay and water. The process of producing toilets includes billet manufacturing, body forming and porcelain sintering. These processes are relatively simple and the cost is very low.

On the other hand, the process of making plastics is extrusion, or injection molding. For toilets with complex structures, the cost of using plastic is too high. That’s why plastic is generally found in toilets only seats: using it as a leading material can lead to high costs. That’s why plastic is generally found in toilets only seats: using it as a leading material can lead to high costs.

One more factor is durability. When we use the toilet, it is best not to leak or spray anything. Porcelain with strong durability is very firm and rigid. This plastic can’t be guaranteed. If you are a skinny person with normal physique, you may not feel very deeply about this. However, for an overweight person, if he makes a toilet every time, he will make a hard landing. The toilet is also a durable product. It can be imagined that plastic materials will gradually become curved under the strong impact of one to two times a day. This is a very important user experience.

So it’s not realistic to make the toilet with plastic. What about stainless steel? Stainless steel is not only strong, but also the production process is not very complicated. Although stainless steel is also very strong, but it is very sensitive to changes in temperature. It may freeze your butt on the toilet. A plastic seat above the stainless steel toilet looks weird. As long as I think about toilets in prison and toilets on trains, I think the toilet should never be stainless steel.

Porcelain is also very waterproof. Porous materials not only contain water, but also provide conditions for the propagation of bacteria. Toilets, which are specially designed to clean waste, are not affected by bacteria and water. Then the secret of porcelain waterproof is the glaze. As mentioned before, glaze keeps bacteria and water in the outer layer of glaze, which is also easy to clean up.

Porcelain has always been the first choice for toilets and bathroom materials for many years. This is indeed impressive. Everyone in the world may use the toilet in a different way, but the same thing is that it must be comfortable and clean. This is also the origin of the high standard of BARANA bathroom sanitary wares.