Posts

How to Clean Hair Out of a Shower Drain?

/in /by


Unclogging hair from the drain can be gross, but sometimes you have to do it! You can use a snaking tool specifically made for hair clogs or make your own using a wire hanger. Using chemical drain cleaners is also an option if you’d prefer to not mess with tools. If your drain is still clogged after you’ve removed all the hair you can, you may need to contact a plumber.


Use a screwdriver to remove the drain guard. If your shower drain has a guard, you’ll need to take it off to access the actual drain pipe. Insert the tip of a screwdriver into each of the screw heads and twist to the left to loosen them. Then, remove them and set them aside. If the screws are smaller than the holes on the drain, place painter’s tape over the holes to prevent the screws from falling in.


If you have a tub and shower combination, you might be able to remove the drain guard by pressing the guard downward and twisting it to the left. Use pliers or tweezers to remove any visible hair towards the surface. If you see any obvious globs of hair gathered at the top of the drain pipe, use pliers or tweezers to dig it out. Discard the grimy hair into a plastic bag for an easy cleanup.


If possible, use an old pair of tweezers that you don’t use for other purposes. Insert a plastic snake tool all the way into the drain pipe. Insert the end of a plastic drain snake into the pipe until the small handle is at the top of the drain opening. The snake tool looks like a long zip tie with small thorns and a handle on the end. Be careful handling it because the thorns are sharp!


You can buy plastic unclogging tools online or at any home hardware store. If the tool resists going down, try rotating the angle at which you’re pushing the tool into the drain. Pull it out slowly, wiggling it as you pull upwards. Grasp the tool’s handle with your thumb, index, and middle fingers and slowly pull it out of the drain. In order to grasp the most hair, it may help to wiggle and twist it around as you pull it out.

How to Tile a Shower?

/in /by


A tiled shower adds beauty and durability and value to your home, and you can tile your shower all by yourself. There are several things you need to do to properly prepare a leak-proof shower. If you are tiling a shower for the first time, consult with a general contractor before starting the job. Use a hole saw with a carbide bit to cut the holes where the shower head and handles would come through.


Make the cement board flush with the tile lip of your shower pan by using shims behind the board to bring it out to the desired thickness. Make sure to use composite shims. Use 100% silicone caulk to seal the seams between the panels and then apply the silicone behind the board on the stud. Add some seam tape between the panels as well.


Lay the drywall. If using crown molding near the ceiling, lay down 12 to 18 inches (30.5 to 45.7 cm) of drywall instead of cement board. Nails used to fix the crown molding in place will not travel through the cement backer; you’ll need to use moisture-resistant drywall such as greenboard in order to take the nails and affix the molding.


Feather any edges with seam tape and thin set mortar where the backer board meets the wallboard. If there’s a gap between the backer board and the wallboard, you’ll want to use seam tape and then feather the gap with thin set mortar so that it appears as one continuous back. Remember that the seams must remain tight with gaps 3/16″ or smaller. Paint a water resistant primer over any areas you intend to tile.


After you’ve feathered the edges to remove the gap, apply a high quality water resistant exterior primer over the feathered wallboard and backer. Trowel some thin-set onto the back of the tile and spread it with a notched trowel. This process is called “back buttering.” Apply mortar to the backer board along with back buttering and then set the tiles on top of that. It’s a lot cleaner, too!

The selection of the bathroom cabinet and the details of the bathroom decoration

/in /by

In the bathroom, it is a small branch in the architecture system, which is often ignored. Our attention to its functionality is often far greater than its decoration and space design. Because whether we go to the toilet or bathing, the first requirement for bathroom is not clean. Not big? Do you sit in a toilet or a squat? The bathroom is not big. Do you have a bathtub? Besides, it seems that there are no other concerns.

Bathroom not only refers to toilets, but toilets, toilets, baths. According to the layout, toilets can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi open, open and closed. The space between the bathroom will not be very large, and the utilization rate of light will be very large in this narrow space. Bathroom lighting brightness is not very high, too high brightness will easily glare through the mirror to form glare. The cool and shades of lamps that can increase the sense of space should be the best choice.

The bathroom lighting design consists of two parts, one bathroom part and one bathroom section. The bathroom space is dominated by soft light. The demand for illumination is not high, and the light is uniform. The light source itself also has waterproof function, heat dissipation function and not easy water accumulation structure. The general light source is designed in smallpox and walls. In fact, in a lot of cases, the light in the bathroom with the top of the bathroom is darker than the ideal illumination. The bathing bully is not suitable for the bathroom lighting because of the strong light and heat. There should be a special lighting source to solve the problem.

Because of the cosmetic function requirements, the bathroom has higher requirements for the color rendering index of light source. Generally, the high-grade light source with good color rendering is required. The control degree and the angle of light are also higher. It’s best to be on both sides of the makeup area, followed by the top. It is also relative to the brightness of incandescent lamps above 60W. At the same time, in this part of the use of light source is more lively, LED lights, chandeliers and so on in this space will be more useful.

The material of the bathtub is acrylic, cast iron, and steel plate. Acrylic material is now the mainstream, acrylic bathtub is 3-5MM acrylic plate vacuum molding, back coated multilayer glass fiber, good insulation effect, smooth surface clean clean decontamination, the price is moderate. Cast iron bathtub is very heavy, durable, long service life and high price. Strong, wearable, high flatness, smooth glaze, lower price relative to cast iron bathtub. No matter what kind of material of the bathtub to drain the drainage is a good match before the factory, this part is easy to be ignored and the most easily out of the problem. When buying, you must try the drain valve on the spot and operate several times to check whether the switch is sensitive and reliable.

Whether the faucet is plated with copper is usually heavier with copper material. The “heart” of the faucet determines the life of the faucet and the effect of water. It is better to use ceramic spool. The water outlet of the general tap is covered with a rectifying net cover, and a good tap outlet has a double-layer filter screen, which makes the water smooth and smooth without splashing and bubbles, and saves water by 30%. The plating layer can not be maintained for a long time without special maintenance. Good plating has 3 layers, good static surface effect, and guarantees that life will not fall off.

Although the bathroom is small, the sense of fashion can not be less.

/in /by

In the bathroom, it is a small branch in the architecture system, which is often ignored. Our attention to its functionality is often far greater than its decoration and space design. Because whether we go to the toilet or bathing, the first requirement for bathroom is not clean. Not big? Do you sit in a toilet or a squat? The bathroom is not big. Do you have a bathtub? Besides, it seems that there are no other concerns.

Bathroom not only refers to toilets, but toilets, toilets, baths. According to the layout, toilets can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi open, open and closed. The space between the bathroom will not be very large, and the utilization rate of light will be very large in this narrow space. Bathroom lighting brightness is not very high, too high brightness will easily glare through the mirror to form glare. The cool and shades of lamps that can increase the sense of space should be the best choice.

The bathroom lighting design consists of two parts, one bathroom part and one bathroom section. The bathroom space is dominated by soft light. The demand for illumination is not high, and the light is uniform. The light source itself also has waterproof function, heat dissipation function and not easy water accumulation structure. The general light source is designed in smallpox and walls. In fact, in a lot of cases, the light in the bathroom with the top of the bathroom is darker than the ideal illumination. The bathing bully is not suitable for the bathroom lighting because of the strong light and heat. There should be a special lighting source to solve the problem.

Because of the cosmetic function requirements, the bathroom has higher requirements for the color rendering index of light source. Generally, the high-grade light source with good color rendering is required. The control degree and the angle of light are also higher. It’s best to be on both sides of the makeup area, followed by the top. It is also relative to the brightness of incandescent lamps above 60W. At the same time, in this part of the use of light source is more lively, LED lights, chandeliers and so on in this space will be more useful.

The material of the bathtub is acrylic, cast iron, and steel plate. Acrylic material is now the mainstream, acrylic bathtub is 3-5MM acrylic plate vacuum molding, back coated multilayer glass fiber, good insulation effect, smooth surface clean clean decontamination, the price is moderate. Cast iron bathtub is very heavy, durable, long service life and high price. Strong, wearable, high flatness, smooth glaze, lower price relative to cast iron bathtub. No matter what kind of material of the bathtub to drain the drainage is a good match before the factory, this part is easy to be ignored and the most easily out of the problem. When buying, you must try the drain valve on the spot and operate several times to check whether the switch is sensitive and reliable.

Whether the faucet is plated with copper is usually heavier with copper material. The “heart” of the faucet determines the life of the faucet and the effect of water. It is better to use ceramic spool. The water outlet of the general tap is covered with a rectifying net cover, and a good tap outlet has a double-layer filter screen, which makes the water smooth and smooth without splashing and bubbles, and saves water by 30%. The plating layer can not be maintained for a long time without special maintenance. Good plating has 3 layers, good static surface effect, and guarantees that life will not fall off.

How to decorate a small space bathroom?

/in /by

The bathroom is a necessary functional area in the home. Regardless of the decoration effect of other spaces in the home, the washroom must be well decorated. If the toilet area is large enough you can add the required parts according to the daily needs, but if there have the small space bathroom needs more attention in order to achieve the ideal use effect.

A small bathroom has three functions: shower, wash table and toilet. It is the necessary place to solve personal bathroom. Many people plan the bathroom into dry area and wet area, it is convenient to live and improve the quality of life, but the size of the small space bathroom itself is limited, so it can be designed with the help of shower door, shower curtain and so on. The effect is the same. Small space bathroom in the decoration must be more attention to practicality, some looking beautiful but the actual use of material will be avoided, especially the double pole towel rack this comparison occupies space, but in fact, can not hang two towels of material not to choose. The size between washbasin and water taps material needs to be matched with the choice. Wall decoration can also choose some cheap and fine domestic floor tiles and wall tiles to paving.

Many small bathroom is located in the inner room, and their daylighting is not enough. Therefore, the selection of lighting in lamps and lanterns should be paid more attention to it, and the special environment of the to bathroom is taken into account. It is better to choose some incandescent chandeliers which can be waterproof and explosion-proof to make up for the shortage of lighting problems. The styling of lamps and lanterns can be simple and fashionable, it can also broaden our horizons. Small bathroom wash area, the choice of the basin, bathroom cabinet and other equipment more inclined to shape small and exquisite, to avoid redundant decoration, especially the wash mirror can choose square. The design of towel rack should also be concise, and the height of the towel rack is the same as that of the basin, which is more convenient for human body engineering. The basin should not be selected for the pedestal basin. The space of the column is basically wasted. The wash basin on the lower counter has better storage and can store scattered items.

Small space bathroom in the color selection of the best use of light color system, can be match with white and some bright yellow, light blue, and so on, this way will not cause visual, spiritual, and other aspects of the depression. There are many functions in the bathroom, and many items are used, such as washing products such as washing face milk, sanitary and cleaning articles such as toothbrush cup, shaving tools and so on, and so on. All of these fragmentary items are added up very much, without receiving it in the bathroom, it is more chaotic. At this time, we can put some multifunctional receiving boxes in the bathroom, and can set up common bathroom cabinet, mirror bathroom cabinet and bottom bathroom cabinet and so on.

what are the advantages of wall mounted bathroom cabinets

What Are The Advantages Of Wall Mounted Bathroom Cabinets?

/in /by

what are the advantages of wall mounted bathroom cabinets

Do you know if you understand the wall mounted bathroom cabinet, bathroom cabinet wall mainly by the wall hanging, both open, put common objects, and closed the drawer can be placed, easy to damp things, small and practical, so what are the advantages of wall mounted bathroom cabinet?

Advantages of wall mounted bathroom cabinet:

As long as the bathroom space, bathroom cabinet is much bigger than the practical column: first, the bathroom has a lot to receive, there is a cabinet, can put things inside out of order; secondly, there is a table around the basin, you can easily put a lot of activities. At least one of the basins at home should be large and deep, so that clothes can be easily cleaned. Bathroom counters should be bigger as possible.

If necessary, to the bathroom cabinet above the cabinet with a mirror, and can add a lot of storage space. In order to make the best use of bathroom space, custom bathroom cabinet is a good choice, and can let the cabinets do business to you together, not only the price will have some benefits, but also style and family unity.