Posts

The cold knowledge about toilet that you don’t know

/in /by

As a symbol of quality of life, toilets are used by more and more families and public places. The emergence of toilets not only makes toilets sanitary, but also makes many developed countries begin to attach importance to the construction of urban tap water and sewage system. It can be said that the history of toilet development also reflects the history of human civilization and sanitation.

However, it should bring convenience toilet to people, but it also brings unexpected troubles. When there is a lot of toilet outside, even if there is a squat toilet, everyone will wait in line at the door. Some people do not talk about public morality, squatting directly on the toilet, stepping on footprints and muddy water. A good bathroom will provide toilet seat pad, but some people feel unhygienic. Dirty is the only consensus that we have of public bathroom toilet.

The toilet is small and healthy is important. Try to use squat toilets in public places. Since there is no guarantee that public bathroom will be disinfected after each use, so public places should try to choose squat toilets. If the old man is not convenient to squat, use paper to wipe the washer toilet. Planners should also be considerate of the concerns of everyone, while adding more humanized design, such as public toilet crouching toilet on both sides of the safety handrail.

Cardiovascular patients choose toilets. When you go out, you’d better take a portable toilet stool, you can change the squat toilet into a simple toilet, to reduce the squat caused by the sudden rise in blood pressure on the upper body caused by the accident. Go to the toilet at home, try not to plug in the door, so that in the event of an accident, the family can be found in the first place.

Cover the toilet seat when flushing. If the toilet lid is opened during flushing, the instantaneous cyclone in the toilet can throw germs or microorganisms into the air up to 6 meters high and suspend them in the air for hours, thereby contaminating walls and other objects. We should develop the habit of covering the toilet lid while flushing.

Three days scrubbing, both inside and outside of toilet. Many people will wait until the toilet dirt after cleaning, in fact, by this time the toilet inside and outside the bacteria already dense. It’s best to clean it once every three days. If you have urinary tract infection in your home, it’s best to sterilize toilet with household disinfectant. The outer side of the toilet is also best cleaned. Use a piece of cloth instead of mixing it with other rag.

The old man’s toilet is equipped with an armrest. If there is an old person in the family, the toilet door should be opened outside. If it is opened inside, it is difficult to push the door open after the old man falls down unexpectedly. If conditions permit, the toilet should be equipped with handrails and easy-to-use ringing bells, the elderly in case of an accident can promptly notify their families.

Although the bathroom is small, the sense of fashion can not be less.

/in /by

In the bathroom, it is a small branch in the architecture system, which is often ignored. Our attention to its functionality is often far greater than its decoration and space design. Because whether we go to the toilet or bathing, the first requirement for bathroom is not clean. Not big? Do you sit in a toilet or a squat? The bathroom is not big. Do you have a bathtub? Besides, it seems that there are no other concerns.

Bathroom not only refers to toilets, but toilets, toilets, baths. According to the layout, toilets can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi open, open and closed. The space between the bathroom will not be very large, and the utilization rate of light will be very large in this narrow space. Bathroom lighting brightness is not very high, too high brightness will easily glare through the mirror to form glare. The cool and shades of lamps that can increase the sense of space should be the best choice.

The bathroom lighting design consists of two parts, one bathroom part and one bathroom section. The bathroom space is dominated by soft light. The demand for illumination is not high, and the light is uniform. The light source itself also has waterproof function, heat dissipation function and not easy water accumulation structure. The general light source is designed in smallpox and walls. In fact, in a lot of cases, the light in the bathroom with the top of the bathroom is darker than the ideal illumination. The bathing bully is not suitable for the bathroom lighting because of the strong light and heat. There should be a special lighting source to solve the problem.

Because of the cosmetic function requirements, the bathroom has higher requirements for the color rendering index of light source. Generally, the high-grade light source with good color rendering is required. The control degree and the angle of light are also higher. It’s best to be on both sides of the makeup area, followed by the top. It is also relative to the brightness of incandescent lamps above 60W. At the same time, in this part of the use of light source is more lively, LED lights, chandeliers and so on in this space will be more useful.

The material of the bathtub is acrylic, cast iron, and steel plate. Acrylic material is now the mainstream, acrylic bathtub is 3-5MM acrylic plate vacuum molding, back coated multilayer glass fiber, good insulation effect, smooth surface clean clean decontamination, the price is moderate. Cast iron bathtub is very heavy, durable, long service life and high price. Strong, wearable, high flatness, smooth glaze, lower price relative to cast iron bathtub. No matter what kind of material of the bathtub to drain the drainage is a good match before the factory, this part is easy to be ignored and the most easily out of the problem. When buying, you must try the drain valve on the spot and operate several times to check whether the switch is sensitive and reliable.

Whether the faucet is plated with copper is usually heavier with copper material. The “heart” of the faucet determines the life of the faucet and the effect of water. It is better to use ceramic spool. The water outlet of the general tap is covered with a rectifying net cover, and a good tap outlet has a double-layer filter screen, which makes the water smooth and smooth without splashing and bubbles, and saves water by 30%. The plating layer can not be maintained for a long time without special maintenance. Good plating has 3 layers, good static surface effect, and guarantees that life will not fall off.

Why are the toilets made of ceramics?

/in /by

We have been sitting in the same toilet (or squatting on the same squat toilet for centuries). Sewage pipes are almost hidden from the past, and the seats of toilets are also made in various styles, using different materials. But for the toilet, the material has almost never changed since it was invented for hundreds of years, almost use porcelain materials.

But why don’t we replace it with modern synthetic materials? Technology is so developed that we must have better materials than porcelain, with a better appearance and no peculiar smell. But we really don’t have a better material than porcelain. Toilets need to have the following three abilities: First, it must be a flushing machine. Second, it must be waterproof, clean, and hygienic. In the end, it must be strong. Because people are sitting on the toilet, and some people are very heavy. And porcelain, has met the above three requirements.

For most users, toilets must be a very effective waste cleaner. The toilet design is very complex. Water tanks, valves, overflow pipes and sewage pipes are all very fine. It contains a lot of intricate engineering applications. Glass like ceramic toilet is made of clay and water. The process of producing toilets includes billet manufacturing, body forming and porcelain sintering. These processes are relatively simple and the cost is very low.

On the other hand, the process of making plastics is extrusion, or injection molding. For toilets with complex structures, the cost of using plastic is too high. That’s why plastic is generally found in toilets only seats: using it as a leading material can lead to high costs. That’s why plastic is generally found in toilets only seats: using it as a leading material can lead to high costs.

One more factor is durability. When we use the toilet, it is best not to leak or spray anything. Porcelain with strong durability is very firm and rigid. This plastic can’t be guaranteed. If you are a skinny person with normal physique, you may not feel very deeply about this. However, for an overweight person, if he makes a toilet every time, he will make a hard landing. The toilet is also a durable product. It can be imagined that plastic materials will gradually become curved under the strong impact of one to two times a day. This is a very important user experience.

So it’s not realistic to make the toilet with plastic. What about stainless steel? Stainless steel is not only strong, but also the production process is not very complicated. Although stainless steel is also very strong, but it is very sensitive to changes in temperature. It may freeze your butt on the toilet. A plastic seat above the stainless steel toilet looks weird. As long as I think about toilets in prison and toilets on trains, I think the toilet should never be stainless steel.

Porcelain is also very waterproof. Porous materials not only contain water, but also provide conditions for the propagation of bacteria. Toilets, which are specially designed to clean waste, are not affected by bacteria and water. Then the secret of porcelain waterproof is the glaze. As mentioned before, glaze keeps bacteria and water in the outer layer of glaze, which is also easy to clean up.

Porcelain has always been the first choice for toilets and bathroom materials for many years. This is indeed impressive. Everyone in the world may use the toilet in a different way, but the same thing is that it must be comfortable and clean. This is also the origin of the high standard of BARANA bathroom sanitary wares.

How to choose home bathroom decoration will more rational?

/in /by

Home decoration, in addition to guest bedroom, kitchen, there is an essential functional area – bathroom. Are the partners always having a headache for the bathroom renovation? The space of general bathroom is limited, so we have to arrange the sanitary wares and household appliances reasonably in limited space. Also pay attention to many details: material selection, layout, up and down pipe, circuit, waterproof, leakage, humidity and so on. Whether it is a large space bathroom (above 6 square meter) or a small space bathroom, there are three main functions that can not be abandoned, and the three pieces of design are well grasped.

Bathroom toilet, the first consideration is the toilet distance. The common toilet width is 70cm, and the distance is at least 40cm in front of the toilet, and the distance between the two sides is greater than that of 10cm. In this way, you can make sure that you sit and walk smoothly, and you can also determine the width of the bathroom cabinet. The main attention is to pay attention to the toilet antifouling method, if the lower seat toilet, siphon water is more suitable, and the noise is small; the punching type is more suitable for the rear sewage pedestal, but the flushing noise is large. It is not recommended to buy a square toilet, a special toilet and a small toilet, because it is difficult to find a match when buying the smart toilet lid.

The bathroom cabinet can be divided into natural stone, artificial stone, fireproof board, baking varnish, glass, metal and solid wood. The substrate is the main body of the bathroom cabinet, which is concealed by the surface material. The base material is the determinant of the quality and price of the bathroom cabinet. When we choose bathroom cabinet, we should not only look at the color and shape of the products, but also pay attention to the inside and the back. Due to the special coating on the front side of the bathroom cabinet, splashing water or liquid is easy to wipe. And the back and interior are not easily erased. It is easy to cause corrosion.

For the back of the bathroom cabinet, many manufacturers also choose to do some waterproof treatment on the back. With protection, water is not easy to invade from the back. In addition, the size and shape of the bathroom cabinet are also the problems we have to consider. We need to combine the size of the bathroom space and the style of the decoration to determine the appropriate style of the bathroom cabinet. Such reasonable reserved space will also bring convenience to our daily bath. The most important thing is to prevent the direct contact between beads and bathroom cabinets. Therefore, when placing the bathroom cabinet, we should pay attention to the position away from the rain shower nozzle and the hand washing basin, and play a key role in moisture-proof.

Now the bathroom is basically dry and wet separation, toilet, washing basin table and shower room separately. The most widely used shower room is glass partition without affecting light. There are two kinds of corners and one word shape. Which style is chosen mainly depends on the layout of the bathroom. When making a shower with glass partition, please note: the width of shower room. At least ensure that the body can rotate freely when in daily life used. The size of the general shower room is not less than 900mm*900mm. If space is allowed, you can do more wide 100mm. It is not recommended to shower room size less than 800mm*800mm, not only will the body crash into the glass door, but also not easy to breathe. Shower room height: mostly 2000mm, also can adjust according to family height, actual space condition.

Faucet showers and hardware choose high price and good quality, because the usage frequency is very high, and later change is very troublesome. Wash basin, toilet water pipe, to install angle valve, so as to facilitate future maintenance. The power switch is best equipped with a waterproof box. It is better to use cold light source fogging and water-proof energy-saving lamps for bathroom lights. It is better to measure the floor tiles before they are dry. Let’s see if the lowest point is the floor drain, so as to prevent it from being reinstalled later.

The solution to the toilet problem

/in /by

Toilets, such as the smell, yellowing, water leakage, blockage, displacement, slow launching and unclean rinsing, are often bothering us in the daily use of toilets. How to solve the major problems?

The flush of flanges and pipe openings is one of the culprits of producing odors. During installation, materials such as ointment and other materials should be embedded in the drain outlet, sealing the interface. If the interface is sealed well, the odor may be emitted from the floor tiles. The bottom sealant of the toilet is not strict, causing odor to return. The toilet cover is not tight sealed, causing the odor to return. To see whether the toilet’s water seal is enough, there is a certain water seal after the toilet water has been washed out, so as to ensure the isolation of the pipeline. If the water seal is damaged, this time you have to change the toilet. When installed, the sewage pipe is not well sealed with the toilet outlet, and it is also easy to run out of odor.

The floor tiles around the toilet are hollowed, and the hollow floor tiles should be repaired first. Use glass glue to make a circle at the bottom edge of the toilet to keep it sealed. After the toilet, cover the toilet cover in time. Always use water to flush the toilet, so that there is no stagnant water or deteriorated water in the water storage bend. The toilet can be used as a dredging agent: the toilet can be poured into the toilet at intervals, and the toilet lid can be closed for a while and then rinsed with water. A small cup of vinegar will be placed in the toilet, and the odor will disappear. It is valid for six or seven days and need to be changed once a week. Drying the residual tea leaves and burning them in toilets or ditches can eliminate odor.

The yellowing of the toilet is related to the material of the lid, and also to the daily maintenance. In the past, the ABS materials had more cover plates and were easy to turn yellow. Now the market is dominated by PP materials. These materials are more resistant to color than ABS and are not easy to turn yellow. There is also a good UF material. It is suggested that the lid of the two materials should be selected when changing the toilet lid. In daily maintenance, be careful not to let the sun shine directly on the toilet lid, and sunlight can also cause discoloration. Toothpaste can be scrubbed with toothpaste when cleaning. The toilet has been used for a long time, such as scale, urine and so on. The inner wall of the toilet will become yellow. First, spray the foaming detergent in the toilet, then brush the old stockings on the stick, then thoroughly remove the dirt in the toilet. The coke and other carbonated drinks are washed into the toilet, and the results are good. White vinegar is acidic, and the odor factor of the toilet is alkaline. When they meet, they produce neutralization reaction.

If it is found that there are any seepage phenomena on the surface of the toilet, it is suspected that there may be cracks in the toilet. The test method is: first turn off the inlet valve, and then clean the water in the toilet tank, then add red ink or colored ink to the water remaining in the water tank for about 30 minutes. If there is a place where the color ink is exuded, it can be concluded that there is a crack in the toilet, which is not repaired, that is, the repair is also a problem pedestal, the only way is to replace it.

Choosing sanitary ware according to this method is not only economical but also good quality

/in /by

The bathroom decoration is really a top priority, and there are many problems in the use of bathroom. So bathroom sanitary ware must be well chosen. BARANA will teach you today.

Types of toilets: intelligence toilet, two-piece toilet, one piece toilet, wall-hung toilet, urinal, bidet and squat closet. Choose according to the different space and the location of the waterway. How to choose toilet?
Look at the glazed surface of the wash surface. It should be smooth, spotless, pits, chromatic aberration and glaze.

Make sure that the drains are reserved for drainage and drainage. If it is under drainage, we must measure the distance from the center of the drain to the wall, and choose the same distance toilet. If it is horizontal drainage, it is necessary to make clear the height of the outlet to the ground. The outlet of the toilet should keep the height of the drain in the same height or slightly higher, in order to ensure the smooth drainage of the drainage.
When you choose a water saving toilet with 6 liters of water or less, do not think that the smaller the tank is, the more water saving, in fact, the water saving is not entirely dependent on the size of the water tank, which depends on the design of the flush and drainage system of the toilet and the accessories of the water tank.

Look at the water tank accessories of the toilet, the surface of the water tank is smooth, no burr, no scratch, and the mold seam is very small. The active parts cooperate with the slippery, no clear gap, the support material has a certain thickness and firmness, the link and the connection block are the best stainless steel.
Attention should be paid to the direct vertical distance between the sewage pipe center and the wall surface. The distance is above 400mm for the pre water, the 300mm is the middle and the water, and the 200~250mm is the back water. This should be paid attention.

The types of bathroom cabinets include solid wood bathroom cabinets, wooden bathroom cabinets, PVC bathroom cabinets and acrylicbathroom cabinets. How to choose the bathroom cabinet?
Appearance: the general set of bathroom cabinet needs to check whether there is any deformation in the bathroom cabinet.
Material: check whether the surface is cracked and glaze is smooth and even.
Accessories: check whether the hinge is noisy or not used properly when the bathroom cabinet door is switched.
Stain resistance: pencil on the bathroom cabinet and wipe it off to check its anti fouling capacity.
Anti fouling capacity: pencil on the bathroom cabinet and wipe it off to check its anti fouling capacity.

The wash basin includes electroplating basin, crystalline glaze basin, decoration basin, art basin, wall hung basin, pedestal basin, common basin and glass basin. How to choose wash basin?
First look at the instructions, if the glazed wash basin, the lower the water absorption, the better the quality.
And then look at the number of faucets, most of the porcelain basin reserved for a single hole for the use of mixed faucets, when buying a basin can require a supplier opening, if their own opening, it is likely to destroy the whole wash basin.
The high quality washbasin has smooth glaze on the surface, no needle eye, lack of glaze, and so on. The sound made with hard knocking is crisp.
In order to ensure that after the purchase of the wash basin quality business timely maintenance, it is best to keep the invoice issued by the store.

The bathroom accessories of sanitary ware include: faucet, soap dishes, paper holders, robe hooks, towel rings, corner valve, liquid soap dispansers, toilet brush holders, cup & tumbler holders, towel racks and so on. How to choose bathroom accessories?
First look at the coating is good, the general surface is more bright and delicate, the more obvious the mirror effect, the more rigorous the process.
The packaging design is beautiful, the quality inspection book, the installation instructions and the relevant after-sale instructions are all available.
Holding the hardware for 2 or 3 seconds to loosen, the fog and trace will disappear quickly, that is copper, heavy weight and thick handle.

Selection and purchase of sanitary ware

/in /by

Toilet decoration costs in housing decoration costs accounted for a very large proportion, then we can choose inexpensive shopping bathrooms to save money? The toilet is divided into one-piece toilet, two-piece toilet and wall hung toilet. According to their actual needs and toilet area to choose the appropriate toilets. A small toilet can be built with a wall hung toilet, and an area with ample toilet can be connected with one-piece toilet and two-piece toilet.

To observe the quality of the toilet, we need to start from four aspects. First, we should observe the ceramic surface. The more luster is, the better the density is. It can effectively prevent water vapor from permeating. Then we can compare the water-saving performance from 3 liters or 6 liters of specifications, and finally check whether the structure of each part of the toilet is firmly connected.

Bathroom cabinets mainly include four kinds of solid wood bathroom cabinets, ceramic bathroom cabinets, PVC bathroom cabinets and acrylic bathroom cabinets. The solid wood bathroom cabinet is made of dehydrated solid wood as the base material. The appearance grade is high and the waterproof performance is good, but it is heavy and easy to crack, and it needs good maintenance. Ceramic bathroom cabinet is clean and easy to handle, but it is easy to be damaged. PVC bathroom cabinets are more glossy in appearance, lighter in cabinet and better in waterproof performance, but PVC bathroom cabinets are susceptible to deformation. The acrylic bathroom cabinet is similar to the PVC bathroom cabinet, but it is crisp than the PVC cabinet. It is easy to produce scratches and cracks.

The quality of bathroom cabinets can also be viewed from four aspects. First check the appearance to see if the bathroom cabinet is damaged, cracked or deformed. First check the appearance to see if the bathroom cabinet is damaged, cracked or deformed. Then check whether the bathroom cabinet glaze is smooth, the surface is cracking. Then check whether the bathroom cabinet components are tightly connected, and whether the use is smooth. Finally, the anti fouling capacity of the bathroom cabinet can be tested by writing and erasing.

Wash basins are mainly divided into table wash basins, vertical wash basins and corner wash basins. The table wash basin is suitable for large bathrooms, and the material is mostly marble or granite. Vertical wash basins are suitable for medium size toilets. Corner wash basins are suitable for small bathrooms because they are very small. In addition, we need to choose the type of wash basin according to the number of faucets, so we need to plan the number of perforation ahead of schedule.

Compare the quality of the wash basin according to the glaze quality of the ceramic wash basin. Under high light, observe whether the glaze appears sand eye and point. If the glaze is smooth and smooth, it represents the anti fouling ability of the wash basin, easy to clean and have good antibacterial effect. In addition, the water absorption of the glaze is also an indicator of the quality of the washbasin. The lower the water absorption, the better the quality of the wash basin, because the glaze with high water absorption will expand and crack, and the test water absorption can be compared by dropping ink on the surface of the ceramic.

Sanitary ware hardware accessories include faucet, shower, rack, corner valve, soap net, clothes hook and so on. Hardware accessories are divided into pure copper fittings, stainless steel fittings, aluminum alloy fittings, zinc alloy fittings. Because of the complexity and complexity of these accessories, it can be compared and analyzed through these aspects. First of all, look at the brand. Generally speaking, the higher the brand awareness, the better the after-sale. Then look at the material, material and price are closely related, avoid buying inferior material accessories. Finally, look at the appearance of hardware fittings of sanitary ware, from the degree of finish and wear resistance.

The selection of sanitary fittings and hardware accessories also needs to be considered from the use environment and purpose, and can not be blindly purchased. If it is not matched, it will be very troublesome. For example, washbasins for bathroom spaces usually use single or double faucets. Bathtubs and shower rooms usually use triple lead. There is also the choice of sprinkler time, according to the size of toilet area to choose, small area on the use of portable sprinkler, large area on the top of the choice of sprinkler.

which is better for bathroom cabinet floor type or hanging type

Which Is Better For Bathroom Cabinet, Floor Type Or Hanging Type?

/in /by

which is better for bathroom cabinet floor type or hanging type

1. Suspension: the bottom is suspended and supported by parts connected to the wall.

The hanging type requires the wall to be a load-bearing wall or a solid brick wall, which is hung under the bathroom cabinet and is easy to take care of. The toilet is sanitary and basically has no sanitary dead corners. In addition, it can effectively prevent moisture from extending into the cabinet. Insulation walls and lightweight partitions do not install such products. Therefore, the hanging bathroom cabinets are conditional requirements, to see if your home bathroom wall meets these requirements.

2, floor type: bottom touch ground, support by the ground.

Floor cabinet and hang the difference is not big, that is, do not pick the wall, although most of the bathroom cabinet wall type, but landing bathroom cabinets are also beautiful, such as the retro style of solid wood bathroom cabinets.

But under the cabinet is not good care of health, there is the cabinet is easy to damp, suitable for wet and dry separation bathroom. Floor style bathroom cabinets also have floor type bathroom cabinets, preferably placed in larger bathrooms, so as not to feel crowded, and easy to dry and wet separation.

bathroom purchase installation bathroom three recipes

Bathroom Purchase: Installation Bathroom Three Recipes

/in /by

bathroom purchase installation bathroom three recipes

Buy toilet sanitary ware should pay attention to water means and water consumption, water closet flushing common way is divided into straight, siphon and wash down three. According to reports, the straight type because of flushing noise and easy to anti flavor, has gradually withdraw from the market, deodorizing water-saving siphon type and blunt down style has become the mainstream of the market. Siphon are quiet water closet, not easy to anti taste, wash down the sewer is wide, relatively large impact.

According to the materials of the bath is divided into ordinary steel bathtub, acrylic bathtub, cast iron bathtub, the cylinder, in general, ordinary steel bathtubs and easy to clean, other than a single; acrylic bathtub modelling is rich, but shorter life expectancy, aging is not easy to clean; cast iron bathtub has the advantages of long service life, high quality, but the price is high handling, installation is more troublesome. The bath accessories and accessories like toilet bowl, basin, different needs of different types of bath accessories, its role and significance can not be ignored.

Buy the wash basin, should be the first to choose sometimes sizes and styles according to the actual situation of the toilet area, if the area is small, the general should be chosen column basin  because of the small size of the bathrooms using column basin can enhance toilet aerate feeling; if the area is larger, can choose each basin, because the basin can enhance the sense of quality. In addition to modeling, the basin should pay attention to the quality of the glaze, because the glazed surface does not hang dirty, the surface is easy to clean, and the long-term use is still bright as new. When the choice, but to the light, viewed from the side of the ceramic glaze should be good, no splash, pinhole, sand holes and bubble, the surface is very smooth.

a small method of toilet maintenance

A Small Method Of Toilet Maintenance

/in /by

a small method of toilet maintenance

1, if rinse with warm water closet,hot water do not pour into the toilet, so as to avoid the explosion.

2, the toilet can not be rushed into newsprint, paper, urine pad and other easy to plug things.

3, when the blockage, immediately with a leather suction device excluded.

4, to prevent breakage and Water Leakage, do not impact ceramics, avoid hard hitting cover and seat

5, please do not use steel brush and strong organic solution cleaning, so as not to damage the product glaze, corrosion pipeline.

6. To keep the toilet surface clean and flush, please use long handle, nylon brush and soapy water or neutral detergent to clean the pipe and flushing hole. It is recommended to be cleaned at least once a week.

7, please clean the filter at least once a month, to prevent the water tank is slow.

8, please don’t use chlorine detergent in the water tank, otherwise it may destroy the device in the water tank and cause leakage or damage to the structure of the building.