Posts

The decoration must be known: the bathroom waterproof process and precautions

/in /by

The bathroom is the most humid place in the house. To prevent the seepage of the sanitary room wall and the ground is the problem we need to consider. BARANA brings detailed bathroom waterproof process and points for attention to show you. If there is any doubt about this, you must be sure to look at it carefully.

Brush the first waterproof coating: ensure that the construction site is clean and dry before construction. The waterproof coating should be covered with no omission. It is firmly combined with the base, without cracks, no bubbles and no shedding. The brush height is uniform and the thickness must meet the bathroom space requirements. Brush second times: pay attention to brush the first and second times waterproof paint need to have a certain time interval. After the first coating is dried, it can be carried out for second times. The specific time depends on the coating. The interval is too short, and the effect of waterproofing will be greatly reduced.

Protective coating for bathroom: to prevent the subsequent construction from damaging the waterproof layer, we need to lay a protective layer on the surface of the waterproof coating. The protective layer should be fully covered with waterproof layer. It is firmly combined with the base, no cracks, no bubbles and no shedding.
Bathroom closed water test: when the closed water test, the waterline at the highest point of the ground should not be lower than 2cm. Preservation for at least 24 hours. There is no leakage is observed. If there is leakage, it needs to be redone. This is very important and can not be ignored.

Bathroom treatment and cleaning at the grass-roots level, making leveling layer, bonding layer, detail additional layer, acrylic waterproof layer, water storage test, protective layer construction, and two water storage test.
Ensure that the bathroom floor is relatively stable: if you need to replace the floor tiles of the bathroom, after the original ceramic tiles are chipped away, First of all, we should use cement mortar to make the ground flat (especially the newly renovated house), and then do the waterproof treatment. Do this in that way can avoid leakage of waterproof coating due to uneven thickness or puncture of waterproofing membrane.

The joints should be brushed in place: the joints between the walls of the toilet and the ground and the joints between the upper and lower pipes and the ground are the most likely problems. Therefore, we must pay special attention to these parts. We must be careful in dealing with them. You can’t have the slightest carelessness in this bathroom space.
Wall processing is also very important: in order to achieve better waterproof effect, the general bathroom on the wall also should do about 30cm high waterproof treatment to prevent water accumulation to penetrate the wall. The wall adjacent to the bathtub is also higher than the height of the bathroom bathtub. The shower room is to reach the height of 180cm.

Waterproof test can not be omitted: after the waterproof construction is completed, all the sewers of the toilet should be blocked up for water injection test. After 24 hours of inspection, if there is no leakage on the walls and floors of the shower, the waterproof quality of the toilet is very good. On the other hand, we should find out the leakage and carry out maintenance. This step is especially important and can’t be ignored.
Keep the water flowing unobstructed: all the sewer pipes in the bathroom, including floor drain and sanitary pipes, must be kept unobstructed.

The bathroom is small? Is the house irregular? Please look at the decoration plan

/in /by

Small apartment bathroom space is generally small, only to meet the washing and gargle, there is no sufficient space to collect, and too many bathroom products crowded in small space, it is small and chaotic. At the same time, in the irregular bathroom, many bathroom products in the market are not compatible with the layout of the bathroom space, which makes the whole space of good end become “four different”.

Indeed, many small and irregular bathroom space transformation is not only about money and space, but also the problem of housing, narrow space and so on. At the same time, it also involves many factors, such as difficult transformation, inadequate utilization, dry and wet separation. Therefore, there are few large brands or even perfect construction teams in China to make the overall bathroom space customization.

BARANA bathroom sanitary wares can be done, its overall custom bathroom space can help you create a unique bathroom space. Whether it is a large bathroom space, small space, or irregular bathroom space, the overall custom of BARANA bathroom sanitary wares can be used in a specific space to wash daily, make-up, bath and so on in one room, and as full as possible, multi-functional, not tedious, with strong practicality, give you a beautiful bathroom space.

In the overall space customization of BARANA bathroom sanitary wares, there are relatively simple and elegant colors and shapes. At the same time, mirror wall and mirrors are used to make the small bathroom visually look bigger and more beautiful. While achieving the basic storage function, it can also make the whole spatial pattern simple and not simple, dynamic and dynamic, and rich space aesthetic feeling.

For the transformation of irregular space, it is important to make use of the storage space and be able to take advantage of the trend to maximize the basic functions of the bathroom. BARANA bathroom can set the right size products for your bathroom. And proper irregular bathroom supplies should match each other, so that the space can be turned into a bright spot in bathroom space. In this way, we can transform a peculiar form of breaking the normality into an interesting vitality and charm. At the same time, it is practical and full of emotional appeal.

Have you ever experienced the emergency toilet in the morning, but someone bathe in it for a long time? After the bath, the whole bathroom is filled with fog. How can the water on the glass be rubbed away? According to different space and different space characteristics, BARANA bathroom sanitary wares can create a bathroom space for dry and wet separation. The clever separation of shower and toilet space allows you to enjoy the world of shower. At the same time, there is no need to worry about the falling of water splashing floor, or the leakage of electrical appliances in the bathroom space, and it is more reasonable, generous and simple in layout design.

Whether you are the followers of the new Chinese style, or the American style pastoral, modern simple wind fans, BARANA bathroom sanitary wares can create a bathroom space for you to reflect personality traits or interests. Therefore, even small bathroom space or irregular bathroom space, you can customize your unique pursuit of life.

BARANA bathroom sanitary wares provides you with a variety of choices in the overall bathroom space customization. Whether bathroom cabinet, shower room or bathtub, you can choose the color, size, structure, material, style and so on of the bathroom products according to your preferences, style and space requirements, and customize the unique bathroom space with a super large collection function. Make your bathroom life more texture and more comfortable. BARANA bathroom sanitary wares overall customization, so that you meet the perfectionism of life.

A fantastic ideas can make bathroom decoration requires to more comfortable and perfect effect

/in /by

We want to break the conventional design of bathroom decoration. The family bathroom decoration effect has both the comfort of the hotel and the perfect feeling of family decoration. Home bathroom is also the most worthy of our creation, through a little wonder, bathroom can become a style inside and outside, farewell monotonous and dull, to meet the distinctive personality bathrooms space.

Creativity and personality. Because bathroom area is limited, so relaxed and simple design style is liked by many people. In general, designers will use rectangular mirrors on the top and wall of the room to enhance the penetration of the room. In the other side of the wall from the bottom to the top of the wall paste colored tiles, shower area and wash area with glass, white tiles, bathroom cabinet, color “wall” and the mirror and light, bathroom is not only refreshing, but also fashionable avant-garde. Some personality designers do not match the color, but choose the full – Caffeine mosaic of the bathroom to carry out full package of bathroom, not only the ground, wall, even the skirt of the bathtub on the whole package of mosaic, perhaps early into the room, feel a little depressed, but more cool people. If you think the whole coffee color is too dull, you can also use the “step by step” type of placement method, transition color.

Retro bathroom design. The smooth and smooth appearance, the color and luster of the visual effect, these are the benefits of stone cast baths, very consistent with the requirements of literary and artistic youth. At the same time, it is also very convenient and convenient in anti fouling and cleaning. The most important thing is that its life is long enough. And through the windows, you can enjoy the beautiful scenery of nature.

The claw bathtub with the bar is very pleasant. The style is well designed, and decorating is also crucial: hanging small makeup boxes can put some small items in common use. Metal rings and poles can be inserted into the wall to store towels and toilet paper. Transparent soap boxes, toothcups and so on are directly absorbed on the wall by suction heads, so that it is convenient to change positions at will. The rattan basket can be hung on the side of the bathtub, with bath salts, aromatherapy oil and flowers.

The most potential is the toilet, when others are not white or ivory, do not want ordinary you, whether to break this stuffy Bureau, a colourful change of the body? Small flowers, cartoon characters and cute animal shapes can be used to decorate bathroom. In addition, make a small bar on the edge of the bathtub faucet. When you soak in the bathtub, and the wine with your hands. Is it very comfortable? The bar at home should be used for oneself. It is the leisure space in the family. It should not be kept in the living room. Bathing in a bathtub is the most relaxing time for a person. It is also the most suitable place for bars.

European style classical bathroom design. The European style bathroom design is a consistent and elegant and luxurious route, and the mosaic of big color mosaic tiles can change the different styles in the ingenious combination of light and shadow. The big bathtub edge creates a romantic atmosphere with candles, and the rose petals reveal the women’s love for romance. Functional double hand basin. In the bathroom the most secretive space in home life, the basin’s insignificant role can affect your day’s life. In the early morning, dressing up and dressing up here makes the mood cheerful and confident. At night, I wash away my fatigue and relax my body and mind for a whole day. Therefore, the selection of a love basin is an important part of the decoration of new homes.

Problems to be solved in the bathroom decoration

/in /by

It is difficult to decorate a small bathroom space. The survey data show that most of the bathroom spaces in the common people are below 10 square meters. How to make the best use of this part of the space has become the focus of most people. The compact bathrooms space requires that we integrate the basic functions and bathroom features as much as possible in the decoration, and strive to make the limited space visually open. In small bathrooms, wash basin and toilet should be choose as small as possible to save the space. In addition, the toilet bowl and wash basin can also use suspended wall to make the bathroom feel more space. In color matching, all the faucets in the small bathroom and equipped with the best uniform light color system, if the choice of more than two kinds of main color, the whole space will inevitably appear to be too messy. Similarly, we must take full consideration of the uniformity of size, color, pattern or texture in the selection of sanitary ware, accessories, and ornaments for such small spaces. In this way, no matter what kind of decoration, it can maintain the continuity of style.

It is difficult to match space and products. In the process of bathroom furniture, it is unavoidable to meet such “disappointed things” – a cheerful choice of their own sanitary ware, but the original idea can not meet the requirements of the installation of products. No alternative but to change the original design, which makes it difficult to satisfy the choice. Usually, the installation of sanitary ware must be carried out by professional construction personnel, and different manufacturers have different requirements for installation conditions. Therefore, before buying sanitary products, we must consider the existing design and feasibility of future construction and how to install it. For example, the faucet needs to bury the appropriate water line, the bathroom cabinet needs to reserve enough space, the toilets seat needs to consider the wall distance, the shower room needs to consider the load-bearing wall, the location of the floor leak, and so on. These conditions must be done well in the home decoration construction process, otherwise the sanitary products may not be installed and used. Therefore, the correct steps should be to understand, select the product before, and then enter the stage of decoration, so that in the construction, we can set up space in accordance with the specific installation requirements and technical parameters of the selected products, transform the pipeline, create the installation conditions, thus creating a perfect bathroom in your mind.

It is difficult to use the space of malformation. Whether it is large space or small space, there will always be such or such a space in the toilet, they are usually small, irregular shape and become the “deep hatred” in space decoration and use. In fact, as long as we spend some time in mind, these odd space can be turned into a bright spot in bathroom space. For example: the lower part of the toilet and basin water tank, can be used to do storage room: set a lattice plate under the water tank, each plate with screws and bracket fixed, The number of lattice plates and the size of the rack can be determined according to the size and convenience of the wall space and the required storage products. In addition, a small storage cabinet can be built behind the mirror, which will undoubtedly provide more space for the small objects commonly used in the home.

The design is not flexible, and a slight error in construction will cause a series of rework. If the socket on the wall is fixed, it is found that the height of the ceiling is just in conflict with it, but it is hard to change the tiles. If the washing basin is installed in place, it is found that the pipeline is not able to pass normally, and only a few more turns must be taken out of the bathroom cabinets. For example, the faucet needs to bury the appropriate water line, the bathroom cabinet needs to reserve enough space, the toilet needs to consider the wall distance, the shower room design needs to consider the weight bearing wall, the location of the floor leak, and so on. Some conditions must be done well in the house installation, otherwise the sanitary ware can not be used in an installation.

When choosing sanitary ware, decorations and other materials, we must give full consideration to the uniformity of size, color, pattern or texture. In this way, no matter how specific the bathroom style is, or what kind of combination it is, it can maintain a strong style consistency. And this design can also make the bathroom have a large space of visual appeal. Also from the practical point of view, small, comfortable and elegant chairs, fine walls and vertical curtains can create a traditional romantic mood, but to pay attention to the high humidity and water stains, it will make the small space easy to damage, destroy the elaborate visual effects, and cause unnecessary trouble for the use of their own days.

Have you learned how to decorate bathroom?

/in /by

Don’t belittle a small bathroom. How much do you know about decorating the bathroom? Summarize the following tips to make your bathroom beautiful and practical.

Bathroom pipe setting
Classification of bathroom pipes: It is mainly divided into upper and lower pipes, as well as hot and cold water pipes.
Bathroom pipe setting: Not only to consider the pipe of bathroom, toilet and hand wash, but also to take into account the problems of water and water on the electric appliances such as solar energy, washing machine and so on, and avoid the embarrassment of retaining the washing machine pipe. In the bathroom between dry and wet separation, it is suggested that a faucet should be reserved in the bathroom for cleaning, washing mops, cleaning the floor, and keeping the bathroom clean at all times.

The choice of lighting
Luminance of lighting: Brightness can be soft, general lighting should be selected incandescent lamp.
Bathroom lamps and lanterns: Waterproof and safety should be chosen as the selection standard. Glass or plastic waterproof lamps should be selected.
Lamp decoration: Everyone’s aesthetic will be slightly different. They should choose according to their interests and tastes.
Lighting installation: During installation, too many lamps and too low height are prone to splash, collision and other accidents. At the same time, too much lighting and too low height will affect the overall appearance of bathroom. So the number and height of the lighting should be moderate.

The treatment of floor tiles and wall tiles
Wall and floor tile construction: After leveling, the walls and floor tiles are waterproof, and the leveling and waterproofing of the bathroom is well handled. It can also avoid the two rework in the later stage.
The selection of wall and floor tiles: The choice of bathroom floor tiles should be clean and easy to handle. The accumulation of hair, foam and dust will breed bacteria. In order to be healthy, these stolen goods should be disposed of in time.
Wall and floor tile modeling: The color, style and collocation of wall and floor tiles are based on personal taste.

Selection of material for ceiling
There are many shapes of the ceiling, and there are many materials for matching.
Flat top ceiling: Choose PVC buckle plate, aluminum button plate, plastic aluminum plate and so on, and light steel keel is easy to fix.
Art ceiling: The dome ceiling can choose soft board, such as waterproof board, soft plate, plastic aluminum plate, and then decorated with colored glass.

The layout of the bathroom
The composition of the bathroom design can be roughly divided into three parts: Toilets, bathroom and face wash area. Therefore, the choice of bathroom products should be matched according to the functions of the area (bathroom, bathroom bath, face beauty area). At the same time, the layout should be arranged according to personal habits.

The electric power of the toileted
Bathroom appliances include water heater, washing machine, solar energy, dry hand, bathing bully, ventilating fan and so on. Caution should be kept away from bathing places, because splashing of water in shower may cause rusting or even leakage of electric appliances. Also, if solar energy is allowed to be installed, try to install energy-efficient and environmentally-friendly solar energy.

Storage bathroom cabinets
There are more small items in general bathroom, such as shampoo, shower gel, conditioner and skin care products. There is no room for storage in bathroom, it will be messy. It is suggested that the bathroom cabinet should be set up, and it will be a lot of comfort to put small articles into the cupboard.

What Is The Size Of A Child’s Toilet?

/in /by

what is the size of a child's toilet

Size of children’s toilet size
Children’s toilet size is different, generally higher than 70 centimeters up and down, the length is about 70 centimeters. Of course, there are smaller toilet sizes, but it’s customized or purchased according to the size of the family. Generally, the size of children’s toilets on the market is everything. Generally, you report the height and weight of children to the sellers, and they will help you choose a child’s toilet suitable for your baby.

Dimensions of children’s toilets — Considerations
Many factors need to be considered when choosing the size of a child’s toilet. Many parents don’t know the size of a child’s toilet. For example, the size of the bathroom in the home, the child’s height, weight, and so on, in order to buy suitable for children’s home children’s toilet. Of course, in the choice of style and shape, parents should listen to the opinions of children, after all, children’s toilet is reserved for children.

Size of children’s toilet — how to choose
Many parents choose children’s toilets, most of which are blind. In the choice of time to look at the way it is drainage, or in the back row, if the wrong will bring home a lot of unnecessary trouble. Also, if you buy a children’s toilet drop type, consideration must be given to the sewage outfall to the wall distance, not big, not small, so that consumers need very careful.

Size of children’s toilet age
In the purchase of children’s toilets, of course, should also take into account the age of children, different age needs different children’s toilet. The average child can start to use the toilet after one year of age, if the baby is unstable, adults should hold more, so as not to fall down and so on. Generally used for a period of time after the children’s toilet, the child will be familiar with the use, and use it more easily.

Size of children’s toilet — Necessity
The children in the toilet, if the toilet is too high or too low is not conducive to the child, the child will be at a convenient time to feel very tired, very not adapt to. Moreover, children use adult toilet is not safe, the fart is easy to stuck in the toilet ring, can be said to be very dangerous, not only will cause physical harm to children, but also get psychological damage.

how to choose a toilet

How To Choose A Toilet ?

/in /by

how to choose a toilet

Skills of water saving toilet
To select the qualified toilet in addition to the regular store brand products, consumers also want to have a pair of piercing eye. Mainly from four aspects can roughly determine the quality of water-saving toilets. The first is to look at the ceramic body: if is the OEM toilet, or unlicensed toilet, technology is not enough stress, the sintering temperature is only eight or nine of centigrade, so easy to cause the body absorption rate is relatively high, is used for a long time will be yellow. So, when choosing toilet, we should pay more attention to the quality of the body.

Second look glaze: brand-name unlicensed toilet outer usually use ordinary glaze, not smooth, easy to stain residue, which will appear repeatedly wash clean phenomenon. In addition, less smooth, more bacteria will stay, affecting health. Good toilet will use high quality antibacterial glaze, smooth, easy to clean.

Look at the water again: water is the most critical part of the toilet, which directly determines the service life and flushing effect of the toilet. Many people will find the toilet at home for a period of time will appear stiff, press play button up or not to flush, which means you choose a piece of poor quality toilet water, if the warranty is not in place, it will only replace the toilet.

Finally, we need on-site test: most stores will have a trial device. Consumers might as well try directly to flush the toilet.

Market Introduction Of Toilet Categories

/in /by

market introduction of toilet categories

Toilet seat —- the toilet in the market is divided into four kinds according to the way of sewage disposal, such as falling down type, siphon down type, siphon jet type and siphon whirlpool type.

Impact toilet: the advantages of cheap price, small water consumption, good sewage effect, the pool has a smaller water area. Drawback is noise when discharging.

Siphon toilet: advantages – there is a complete pipeline, the shape of the side inverted “S”, the wall slope is slow, noise problems improved. Disadvantages —- the water storage area at the bottom of the pool increases.
Siphon injection: the advantages of the siphon type toilet is improved, adding a jet attached way, increasing the flow momentum, speed up the sewage discharge, noise problems have improved. Disadvantages —- pool, memory, water area is larger.

Siphon whirlpool toilet: is the highest grade of a kind. Its structure is similar to that of other siphons, but the water supply pipe is located at the bottom of the urinal and passes into the bottom of the pool. In order to meet the design requirements of the pipeline, in the molding process, the water tank and the toilet are combined into a whole. Its biggest advantage is the use of the two kinds of effects: siphon vortex and vortex can produce a strong centripetal force, the dirt quickly involved in the whirlpool, with the siphon drain away dirt generated, the flushing process is quick and thorough, and the smell of small, low noise.

toilet installation faq

Toilet Installation FAQ

/in /by

toilet installation faq

Common problems and solutions of toilet installation

Question 1: after the toilet is installed, can not stand against the wall?

This is related to the selection of the toilet drain distance and the distance of the reserved blowdown pipe from the wall. Some toilet sewage discharge distance from 210mm, 305mm, 400mm three specifications. Under normal circumstances, allow the installation of size 190-210mm, 285-305mm, 380-400mm, that is to say the toilet back, 20mm away from the wall clearance, the purchase should be based on home reserved sewage pipe actual distance from the wall size control, allows the selection of toilet installation size specifications. If the sewage pipe from the wall distance is dead and not standardized, without proper drainage from the toilet when the choice, can buy 1 shifters to adjust. Shifter generally can increase or decrease the maximum distance of the center about 100mm.

Question two: how do you maintain the back of the toilet with a high back?

Toilet parts because of the more complex, and the use of high frequency, affected by water quality and so on. Generally install angle valve, hose, filter, to facilitate the daily maintenance of the toilet. Normally the inlet angle valve is mounted on the side of the toilet and 200mm high above the ground. For this kind of high back toilet, the angle valve is installed on the back of the toilet and is blocked by the toilet after installation. In order to facilitate maintenance, manufacturers in production, taking into account these reasons, usually in the lower part of the toilet, there are maintenance holes. Maintenance can enter the internal switch from the maintenance hole inlet angle valve, or from the upper part of the water tank to the water tank cover is opened or removed to repair, the complete set of product maintenance.

Question three: toilet drain button, press down, can not play or loose, why?

This is related to the quality of the product. It can not be played because the spring is not elastic and loose because it is not locked. Regular manufacturers of buttons, in the warranty period and the number of required use does not occur in this case. But some manufacturers of poor quality of production, the number of times and shelf life will be relatively short.

bathroom renovation which toilet flushing is more convenient

Bathroom Renovation: Which Toilet Flushing Is More Convenient?

/in /by

bathroom renovation which toilet flushing is more convenient

 

Toilet flush way has straight style and siphon type, each of these two ways have their own advantages and disadvantages, users can choose their advantages and disadvantages when selecting, which is best suited to their own.

Straight into the toilet flushing is very simple, is to use the water itself gravity and speed the dirt washed clean, the pipeline has the advantages of simple structure, short path pipe thick, not easy to be blocked, even after using the toilet to toilet paper and throw it in is not easy to be blocked. But the straight flush toilet has a relatively loud sound. It is easy to wake up the family if it is installed in the house and gets up at night. The biggest disadvantage of this toilet is very easy to make a stink in the home, because the pipeline is straight, the smell from the pipeline to diffuse throughout the room, but also in summer easily from the pipe out mosquitoes. Straight flush toilets are now newly renovated houses are rarely used, mostly public toilet used more.

The main way of siphon toilet flushing is to use the suction of the pipe in the toilet and a certain water level drop force to discharge the dirt. The water storage area of the toilet is large, and the noise when flushing is very small, because the suction force is large, the flushing is relatively clean, and the toilet surface does not leave some unclean filth. Siphon type toilet pipe is bent, the smell is not easy to play, relatively clean. There are many ways to flush the siphon toilet in the market now. There are vortex siphon toilets, flush methods, and flush toilets. But siphon toilets are more likely to clog up and do not throw waste paper into the toilet. Siphon toilets are prone to flush toilet problems and are more troublesome.