Posts

The Knowledge of Buthtub

/in /by


Drain kits come with all of the plumbing and hardware you need in order to put it together. Tip: Dry-fit the L-shaped pipes to your drains first and measure the length between them to determine how much pipe you need in order to connect the drains together. Make your measurements twice to make sure they’re precise before cutting the pipe.


Use a sealant on the drains and pipes to secure the joints in place. ABS glue is a liquid plastic that seals your pipes together. Paint a layer of this glue on the inside and outside of the pipes where they attach on your drain show. Hold the pipes together for 90 seconds until they have time to set. Continue gluing all of the joints together until they are completely set.


Use a clear sealant around the outer edge of the drain inside your tub and hold it in place to seal it. Sealant and ABS glue can be purchased at your local hardware store. Cover the exposed studs and flange with drywall or cement backerboard. Cut the pieces of drywall to the sizes of your gaps with a reciprocating saw.


Hold the piece of drywall or backerboard against the studs so it covers the flange and there’s a 1⁄4 in (0.64 cm) gap between the board and the tub. Use nails to secure the boards in place. Drywall or backerboard can be purchased from your local hardware store. Don’t forget to install new drywall on the access panel you cut out from the other room.


Replace the surround. If you’re using tiles, mix tile mortar in a bucket based on the instructions on the packaging. Stir the mortar with a flat trowel and spread it on the drywall. Press the tiles onto the backerboard and hold it in place for 30 seconds. Use tiles that match the existing ones in your bathroom. Otherwise, you’ll have to retile the entire wall.

How to Organize a Small Bathroom?

/in /by

With a bit of careful organizing, you can make a small bathroom feel spacious and tidy. Divide your cabinet space with storage containers and baskets. Make use of every inch of wall space by hanging floating shelves up to the ceiling and over the toilet. You can even add racks, rods, or more storage on the back of the door. Embrace creative storage options, like glass jars, for odds and ends.

Put a lazy susan in the cabinet. It can be easy for the bottles and small items inside your bathroom cabinets to get disorganized and tough to reach. Place a lazy susan towards the front of the cabinet where it is easily accessible. Set your extra shampoos, conditioners, lotions, or other products on it.

Install a styling tool holder inside your cabinet. The cords of blowdryers and curling irons can become a real problem under your cabinets and can knock over your toiletry items. You can buy a metal styling tool holder at a home goods store that will hang on the inside of your lower cabinet.

Install under-the-sink sliding drawers if you have deep cabinets. In the lower bathroom cabinets, secure drawers that will slide out when pulled. You can purchase these wooden, plastic, or metal drawers in the kitchen or bathroom remodeling sections of home renovation stores. Most of them will screw right into the existing cabinetry. Check to make sure that the drawers pull out smoothly. If they jostle or if you have to tug them, then the contents standing inside will likely fall over and cause a mess.

Install an under-the-sink organizer if you have a pedestal sink. You don’t have to waste the space under a pedestal sink. Instead, get a premade organizer that will fit around the bottom part of your sink from a home improvement store. These organizers usually just slide into place against the wall with a few mounting brackets to hold it steady.

Divide your drawers with plastic bins. Your drawers can get messy really quickly, as items shift around every time you pull them out. To keep everything in position, invest in a set of plastic organizers that fit tightly into the drawers. Ideally, find containers with both large and small openings to hold a variety of items. For example, you can put hair ties, cotton swabs, flossers, and other small items into the bathroom cabinet.

How to Incorporating Other Features in a Bathroom?

/in /by

Contrast black with white. The drama that a black bathroom can offer is most prevalent when there is a healthy amount of white to provide some striking contrast. The brighter the white the better. Further, classic white fixtures, such as the sink and tub, will not only provide great contrast to black, but will reflect light well.

Another good way to add contrast to dark walls is by painting the ceiling white. This will also help the bathroom feel cleaner and more open. Incorporate texture. If material costs are not a factor, consider going with black marble walls. The variously-colored veins that run through marble will add subtle and appealing contrast. Another way to add texture along with a touch of black is by staining any wood features with an ebony stain.

Dark, textured materials create shadows within a 2-D surface, which imbues a room with character in class. Opt for black flooring. A great alternative to black walls is black flooring. This is likely the best option in bathrooms do not have windows. The classic example would be black, reflective tiles, perhaps held in place with a bright white grout.

Checkered white and black tiles is also popular, and for good reason – it adds both class and enjoyment to a bathroom. Outfit the bathroom with black items. There are plenty of specific ways to add an extra splash of black to the bathroom. For instance, a dark black floor mat will look especially good on a light colored floor surrounded by black walls. If only some of your walls or your cabinets will be black, consider hanging photos in black frames.

Whatever you choose, try to feature black accessories in locations that will stand out. For instance, store folded black towels on metal or glass shelves, as opposed to hanging them in front of a black wall.

How to Renovate a Bathroom?

/in /by

Renovating a bathroom can be as simple as changing out towel rods and faucets for new ones, or as complex as knocking down walls and rearranging tubs and toilets. It can be quite intimidating, especially if you don’t know where to begin. This article will give you the basics of how to renovate a bathroom.

Make sure that your new bathroom meets building codes while still being comfortable. Some places require certain rooms, such as bathrooms, to be a specific size. If the final design does not meat the requirements, the city won’t approve your re-design, and you won’t be able to renovate your bathroom. Be sure to check with your city if you plan on re-sizing your bathroom, and make sure that your design is meeting the building code. Half baths usually range between 3 to 4 feet wide and 6 to 8 feet long in the United States. The larger the half bath is, the more comfortable it will be.

Take advantage of the space in a master bathroom. Master bathrooms are meant to be used by two people. If planned correctly, they can be quite comfortable and roomy. If planned incorrectly, however, they can become cramped and lead to unnecessary elbow-jostling. Consider adding in a separate toilet room with a door; this will give you and your partner more privacy.

Having both a shower stall and a bathtub will allow two people to get clean at the same time. If you choose to have two sinks, make sure that they are at least 36 inches (91.44 centimeters) apart. This will give both people enough space to spread out and not worry about bumping elbows. Be sure to include pathways. If two people are going to be using the bathroom at the same time, they will need enough space to pass by each other. Plan on having 36 to 42 inches (91.44 to 116.84 centimeters) wide pathways in the bathroom.

Have a backup bathroom. This is especially important if you are making renovations that involve plumbing. The last thing you’d want is to be stuck without a toilet or shower for several days. If you don’t have a spare bathroom, you may need to install a portable toilet and an outdoor shower.

Take measurements of everything before you go shopping. You will need to know the exact side of your bathroom, including the width, length, and height. You will also need to know the dimensions of other things, such as toilets, bathtubs, sinks, showers, and cabinets. If you don’t take proper measurements, you may buy something in the wrong size. Taking measurements early will prevent the hassle of trying to return something that doesn’t fit.

Choose slip-free, non-absorbent flooring. There are different types of floor material that you can use in a bathroom. In general, what you pay is what you get. If you want something that looks good, is high quality, and lasts for a long time, you will need a larger budget. Porcelain and glazed tiles are easy to clean and take care of. Marble and granite are expensive, but they look great.

Avoid porous stone, such as limestone. They absorb stains easily, which makes them difficult to clean. If you want a natural stone, then make sure that it is sealed. Try to get something that is non-slip. Look for textured or matte finishes, or glazes that have sand in them. Keep painted or stained cement in mind. You can also get sheet vinyl or vinyl tiles. They are less expensive than the real thing, but they may not look or feel as great either.