Posts

How to Clean a Shower Head?

/in /by

It’s important to clean your shower head because mineral deposits from water build up in the holes of the shower head. These minerals will clog your shower head and prevent water from flowing to its full potential. There are a few different ways to clean your shower head, but they all involve vinegar, which will free up the minerals and clean your shower head best.

Put white vinegar in a plastic bag. You should pour in enough to completely cover the shower head when you tie the bag onto the shower. Make sure that the bag is free of holes and can support the weight of the vinegar for an extended period of time. Pour some baking soda into the bag. You should pour in about ⅓ of a cup of baking soda for every cup of vinegar that you pour into the tub. The solution should bubble.

Raise the plastic bag up to the shower head while it’s still connected. Hold the plastic bag open in your hands. Raise it up to the shower head so that the shower head is completely submerged. Tie off the top of the bag. You can use a zip tie, a rubber band, or even a hair elastic. Make sure that the bag is tied such that you can let go without the bag falling.

Wait at least one hour. You can also leave the bag of vinegar overnight for a deeper clean. The more time you leave the shower head soaking, the cleaner it will get. Remove the plastic bag. Throw away the vinegar and the plastic bag. Run the shower for a few minutes, until it does not smell like vinegar anymore. Your shower should be cleaner and run more efficiently!

Dry the shower. Use an absorbent rag or squeegee to dry off your shower completely. You should dry down your shower after every use, but doing a more extensive cleaning with a mild dish soap and water two to three times a week should keep the marble looking clean and fresh.

How to Removing the Old Faucet?

/in /by

Disconnect the supply tubes. These are the tubes that connect the faucet to the water supply. Use the adjustable wrench to loosen the nuts where the hoses attach to the water supply. Use the basin wrench to loosen the nut attaching the hoses to the faucet. Turn the nuts to the left (counterclockwise) to loosen them. Once you’ve loosened the nuts with the wrenches, you can remove them the rest of the way by hand. Wipe up any water that drips onto the bottom of the vanity immediately to prevent damage or warping.

Loosen the lock nuts to take out the old faucet. Most faucets are attached to the sink by locknuts attached to the tailpieces under the sink. Use your hands or an adjustable wrench to loosen the nuts and unthread them from the tailpieces. Turn them to the left (counterclockwise) to loosen them. Remove the nuts and the washers from the tailpieces. Once you’ve removed the supply lines, nuts, and washers, the faucet will be loose. Hold the faucet in both hands and pull it straight out from the mounting holes. Remove the gasket if there is one and set it aside with the faucet. Use the flashlight to locate the nuts under the sink if you’re having trouble locating them.

Scrub the faucet holes. With a sponge or gentle abrasive pad, scrub the mounting holes around the sink where the faucet sits. Use soap and water or your favorite cleaner or detergent. Once the area is clean, rinse it well, pat it dry, and let it air dry completely. To remove old sealant or silicone, dampen a sponge or rag with mineral spirits and wipe the area clean. Then rinse the area with clean water and pat it dry.

Determine what kind of faucet you have. Once you’ve removed the old faucet from the mounting holes, you can figure out what hole configuration you’re working with and the type of faucet you need. There are three major types of faucets:

Single hole, where the sink will only have one hole for the faucet, and the faucet will all be one simple piece with a single handle. Center-set, where there will be three holes in the sink and the one-piece faucet will have separate handles controlling the hot and cold water. Widespread or split-set, which work with three-hole basins, but the spout and two handles come in three separate pieces.

Purchase a new faucet. Before you go to the home or hardware store for a new faucet, determine the type of faucet you have, look at your basin hole configuration, and measure the distance between the holes so that you get the right replacement faucet. Write down the number of holes your basin has, the type of faucet that was on there, and the distance between the holes. If you want to replace your old faucet with a new kind, you’ll have to replace the basin as well.

Summer Decoration Guide: Let Messy Bathroom Instantly Refreshing

/in /by

Sliding mirror, cabinet, reasonable use, storage

As far as the whole bathroom space is concerned, it is necessary to reserve a cabinet for all kinds of toiletries, which can ensure the clean and comfortable space of the whole bathroom, as well as bath and toilet.

In addition to the column has a special wet packing area, inside the cabinet is designed specifically for hidden waterproof socket, plug in electrical appliances such as small bathroom, very humane.Wall hanging bathroom product

In the improvement of the small family bathroom, the use of recessed approach: for example, one of the bathrooms will be hollowed out, processed into a shelving, placed debris. In addition, can also consider using wall mounted bathroom products, such as wall mounted washbasin, toilet, bathroom products that can save about 10 cm space than ordinary bathroom products, so that the narrow toilet becomes more spacious.