Posts

How Unclogging a Bathroom Sink?

/in /by

Pour boiling water down the drain. To remove stubborn buildups, start by boiling about ½ gallon (roughly 2 liters) of water and carefully pouring it down the drain. High temperature water will begin to break apart and dislodge the blockage. Plunge the drain. Encourage the buildup to proceed down the drain by plunging the drain 5 or 6 times. While this may not fully remove the buildup, it will help loosen it further. Use a plunger that can create an airtight seal over the opening of the drain.

Put baking soda in the drain. Slowly pour about 1 cup (220 grams) of baking soda into drain. Allow the baking soda to sit for a few minutes. Not only will the baking soda absorb unpleasant odors, it will help physically break apart the buildup.

Add vinegar. Pour 1 cup (240 ml) of distilled white vinegar into the drain after waiting a few minutes. The baking soda and vinegar will react with one another and begin to foam. Cover the drain, as this will encourage the baking soda and vinegar mixture to work it’s way into the clogged portion of the drain and break down the remaining blockage. Allow the mixture to sit in the drain for an hour or so.

Vinegar is also a natural deodorizer. Together, this mixture will also help remove any odor the deposit caused. Cider vinegar or lemon juice will work in lieu of white vinegar. After allowing the mixture to sit, rinse again with hot water. Repeat the process to eliminate residual odors.

Snake the drain. Stubborn deposits may require more physical disruption. Get a drain snake from your local hardware store. These are essentially long, thin strips of plastic with hooks on either side. Use it to break up and push or pull away any deposits that have clogged your drain. Keep inserting and removing the snake until no hair or clumps are attached to it when you pull it out.

Alternatively, you can bend a metal coat hanger so it has a hook at 1 end and use that. If it gets stuck, pull it out with a pair of needle-nose pliers. Follow this with a baking soda and vinegar soak to remove unpleasant odors.

 

Market Introduction Of Toilet Categories

/in /by

market introduction of toilet categories

Toilet seat —- the toilet in the market is divided into four kinds according to the way of sewage disposal, such as falling down type, siphon down type, siphon jet type and siphon whirlpool type.

Impact toilet: the advantages of cheap price, small water consumption, good sewage effect, the pool has a smaller water area. Drawback is noise when discharging.

Siphon toilet: advantages – there is a complete pipeline, the shape of the side inverted “S”, the wall slope is slow, noise problems improved. Disadvantages —- the water storage area at the bottom of the pool increases.
Siphon injection: the advantages of the siphon type toilet is improved, adding a jet attached way, increasing the flow momentum, speed up the sewage discharge, noise problems have improved. Disadvantages —- pool, memory, water area is larger.

Siphon whirlpool toilet: is the highest grade of a kind. Its structure is similar to that of other siphons, but the water supply pipe is located at the bottom of the urinal and passes into the bottom of the pool. In order to meet the design requirements of the pipeline, in the molding process, the water tank and the toilet are combined into a whole. Its biggest advantage is the use of the two kinds of effects: siphon vortex and vortex can produce a strong centripetal force, the dirt quickly involved in the whirlpool, with the siphon drain away dirt generated, the flushing process is quick and thorough, and the smell of small, low noise.