Posts

How to Clean a Travertine Shower?

Travertine is an attractive type of limestone known for its looks and durability. Naturally, some people choose it as a shower finish. Riddled with small, natural holes, travertine is beautiful, but prone to collecting soap scum. By performing routine cleaning and protecting your travertine, you can keep your shower looking great.

Remove hard water stains with fine steel wool. Be sure to choose 0000-grade steel wool, as it is very fine and shouldn’t scratch the tiles. Lightly buff away hard water stains with the steel wool. Rinse the shower with warm water. Turn the shower on and rinse your newly cleaned travertine tiles with warm water.

If there are any spots you can’t reach with the showerhead, fill your bucket up with clean water and rinse the tiles clean manually. Dry your travertine with a clean towel. Use a towel to wipe down your travertine to remove any traces of stone cleaner. It may be helpful to open a window to dry the area more quickly.

Get your travertine sealed once a year. Sealing your travertine makes the stone more resistant to damage from soap, grit and hard water. Have a stone professional seal your travertine once a year to keep it looking and functioning great.

Allow the sealer to set for 24 hours. Let the sealer fully absorb and dry into your marble before trying to use your shower again. You should seal your marble bathtub once every six months. Let everyone in your house know that using the shower before the sealer dries could damage your marble.

How to Cleaning Surfaces Before Clean a Bathroom?

Clean the walls, windows and/or ceiling. If you have mold on the ceiling start with spraying a water bleach/disinfectant solution on it and let it rest for a couple of minutes, do the same with the walls ( if they are tiles) or use another cleaning product. With a sponge or a clean rag, scrub the tile surfaces you’ve sprayed. Rinse it carefully to avoid any stripes and dry it with a clean rag. It’s a good idea to wear rubber gloves while you’re scrubbing, to keep your hands from drying out if you’re using harsh products.

Clean the shower. Spray cleaning product on the shower walls, and the shower head and let it rest for a couple of minutes. Spray cleansers made especially for getting rid of soap scum work very well on tubs that haven’t been cleaned in a while.

For hard water areas that are prone to green and rust-colored stains, a cleanser made for eliminating calcium, lime and rust is probably what you need. Never use abrasive cleaners or green abrasive scrub pads or steel wool on porcelain fixtures, as they will quickly dull the finish. Soak the showerhead. If eventually the showerhead becomes quite clogged with hard water build up or soap scum, you can remove it and soak it overnight in a vinegar/water mixture, and then clean with a toothbrush.

Go back over the shower and scrub the walls, faucet and shower head, rinse well with the hottest water and or dry with a towel. You can shine the faucet with a paper towel or a towel. Don’t forget the shower curtain; it is also prone to mildew. A solution of about 2/3 water, 1/3 bleach in a spray bottle can be handy for getting rid of mildew spots. Or you can take it down and wash it in hot water with a small amount of soap and bleach.

Clean the sink and counter area. Scrub all the soap scum and toothpaste off with a small amount of cleaner, rinsing your sponge thoroughly as you go along. Don’t forget to clean your trashcan, tissue holder and other items which regularly remain in your bathroom. An old toothbrush or cotton swabs can be handy for getting the junk out from between the tap and handles.

Be sure never to clean the sink and counter area with the same rag or paper towel you used to clean the toilet. This can spread leftover disease-causing germs to your sink and counter area. To prevent this you can use a specific rag which you use to clean only the toilet. Wipe off the fronts and tops of cabinets and drawers. You’ll probably want to use hot, soapy water for this purpose. If you’re worried about germs on these surfaces, add a bit of bleach to your soapy water.