Posts

How Using a Cleaning Cream Clean Shower Screen?

/in /by


Buy a commercial cleaning cream. It doesn’t need to be expensive—a generic brand should suffice. Find a shower cream anywhere that sells cleaning supplies: home-and-garden stores, bathroom-supply stores, and some drugstores. Squeeze a bit into your hand or a cloth and spread it over the whole surface of the screen.


Don’t worry about ruining the surface—the cream doesn’t harm glass. Rub the cream all over the glass, and don’t feel that you need to rub too hard. If you have a marble shower, you should keep the cleaning cream away from the marble. Grab a damp/wet cloth and wipe off the cream. The cream will froth, and it might take a few attempts to wipe it all off—but you don’t need to scrub!


Dry the screen. Use a clean, dry towel (cloth or paper) to gently dry the shower screen so that the end result is evenly clean. Repeat the process for the tiles the tiles. If you’re worried about the surface of your tiles, you can put the cream onto a cloth instead, but it will take longer and more persistence.


Spray your shower screen with window cleaner and wipe with a squeegee. You can use any commercial window cleaner—for example, Windex. If you do not have a squeegee, consider using a sponge. First, rinse the surface. Get rid of any dirt that has collected on the surface of the shower screen. You can run water from shower over the screen to wash away dirt, or you can use an external water source.


Spray window cleaner on the surface, then lightly wipe it down with a paper towel. Squeegee the surface. Spray on another layer of your preferred window-cleaning solution, then go over the surface with the squeegee until it is perfectly clean. If there are any marks left after the squeegee, go over the surface with a dry paper towel. Don’t be afraid to scrub stubborn spots.

bathroom basin how to install

Bathroom basin how to install?

/in /by

bathroom basin how to install

Undercounter innstallation method

On the stage of the basin installation is relatively simple, just press the installation drawings on the surface of a predetermined position opening, will put in the hole, the gap can be filled with glass glue.

Installation method of table under basin

Undercounter installing a countertop complex installation, first need to install the bracket to customize the size under counter basin, then  basin is installed in a predetermined position, the fixed bracket, will have a good hole in the basin on the table cover. When installing, note that the position of the bracket should be fixed and accurate, besides, the hole should be rounded.

Installation method of column and basin

The general method of installation of column and basin is that first, the launching device of the cylinder is installed, and then the faucet and hose are installed. Then put the column, porcelain column in the corresponding position, put the tray carefully put, pay attention to the water pipe, just inserted into the original ground left the sewer. Then the upper pipe is connected to the upper nozzle. Finally, put a glass of glue along the edge of the column.

install the washbasin notes so that the use of more convenient

Install The Washbasin Notes So That The Use Of More Convenient

/in /by

install the washbasin notes so that the use of more convenient

One: depth is proportional to intensity
The water splashed over me, which I’m afraid is the least comfortable for the consumer. As a rule, the depth of the washbasin is proportional to the strength of the flow of water above the faucet, i.e., the deep pool is equipped with a strong faucet. Must not be installed at the bottom of the thick shallow pond water, it will make people in the water splash. The bottom of the pool should be of adequate radian , not smooth, or the water will stay in it.

Two: pay attention to height
Whether stand-alone or desktop washbasin, or the surface of the pool table height is 8085 cm, because the pond is too short to lumbago.

Three: pay attention to finish
The side of the washbasin should be slightly higher than the table top, but it must be smooth with the surface of the table. The purpose is to prevent the water splashing on the surface from being wiped back into the pool, and to facilitate the cleaning of the table. The table itself must choose the smooth surface of the material, the edge and corners must be smooth, to avoid bumping. The smoothness of the washbasin itself is also very important. The pool surface with a high finish makes the debris in the water difficult to adhere to the surface, and reduces the number of times it takes to scrub.

Four: spatial decision form
The wash basin is roughly divided into two types: independent type and table type. The utility model has the advantages of beautiful appearance, small occupation area and convenient maintenance, and is suitable for toilets with little space. But it needs to be equipped with a mirror case or a bathroom rack to facilitate the use of some toiletries and cosmetics in the space above the pond. A desktop sink should occupy at least one small desk space. It can be placed on the table wash utensils, cabinets below can also litter. If the bathroom area is not large, you can consider installing a triangular washbasin in the corner, the pond above can hang a triangular debris rack, in order to store cleaning supplies.