Posts

Replacement a Bathroom Fan


Turn off the power. Before you begin, you will need to turn off the power to the fan from the circuit breaker box. Unplug the motor and disconnect the wiring. Put on a pair of gloves, safety goggles and a respirator and remove the grille covering from the old fan. You may be shocked at the amount of dirt and debris that fall out of it!


Unscrew or unplug the motor blower assembly from the housing unit, then open up the electrical splice unit and carefully pull out the wires. Remove the connectors and untwist the wires to disconnect them. It’s a good idea to double check that power to the wires is off before doing this. Loosen the cable clamp to free the electrical cable from the fan housing.


Go to the attic and remove the housing. In the attic, detach the duct pipe from both the housing unit and the vent cap connector duct. Pull the electrical cable and wiring free from the housing unit. Use a power drill to remove the screws securing the old fan’s brackets to the joists, then lift the old fan from the ceiling.


Install the new fan. Head back down to your bathroom and remove the new fan from its packaging. If it has the same measurements as your old fan, you will be able to install it immediately. But if the new fan is bigger than the old one, you will need to enlarge the hole in your ceiling. You can do this by tracing the outline of your new fan onto the ceiling, then cutting around the outline with a drywall saw.


If your new fan is smaller than the old one, you can caulk around the edges of the housing unit to fill in any gaps once the fan is installed. Go to the attic and lower the new fan into the preexisting or newly enlarged hole. Make sure the unit is properly oriented for all electrical and duct work connections. Slide out the extendable mounting brackets and secure them to the joists using your power drill and 1 inch (2.5 cm) drywall screws. You may need a helper to hold the fan in place from below as you do this.

How Adding Textiles and Furniture In Your Bathroom?

Add a small, decorative stand or side table. Choose a small stand or a side table that is 12 to 18 inches (30 to 46 cm) across and tuck it into a niche or corner. Not only will this look cute, but it can double-up as extra storage.For example, you could keep candles or bowls filled with pretty soaps on top of the table. If your table has shelves, roll up your towels and place them inside the shelves. Not only is this a great decorative touch, it’s also practical. Consider placing a nice tray atop the table for your toiletries or perfumes.Consider an upholstered bench for comfort and luxury. Choose a bench that matches the style and colors of your bathroom, then set it against the wall. If you have a small bathroom but still want a hint of luxury, consider an upholstered stool instead.Don’t be afraid to take a bench apart and re-paint or re-upholster it. If you decide to re-upholster the bench, make sure you choose a water-resistant fabric. This is especially important if you plan to sit on the bench while wet or place wet items on the bench. Otherwise, it may develop mold or mildew.Get a shelving unit if you have space for it. Not only can this add a decorative element to your bathroom, but it will also allow you to store other items, such as towels, toilet paper, and so forth. Make the shelf more decorative by adding a plant or a vessel filled with pretty soaps or bath bombs.