The more thoroughly (and firmly) you scrub the bowl, the cleaner it will get. Make the most of your toiletcleaner – since it’s accumulated in the water at the bottom of the bowl, dip your brush in it a few times to work up some suds, which will give your scrubbing extra cleaning power.
Flush the toilet. Flushing rinses the bowl and the brush. Continue to scrub as the water drains from the toilet, as the motion of the water may not be enough to rinse all of the dirt away. If you have persistent stains, repeat the cycle of applying toilet cleaner, allowing it to sit if needed, scrubbing, and flushing until the stain is removed.
Clean the rest of the toilet with a disinfectant cleaner. After you’ve cleaned the bowl, you should clean the rest of the toilet, even if it’s not as dirty. When you’re done, not only will your toilet have a beautiful, even sheen – it’ll also be free of harmful bacteria.
Use a spray bottle of “all-purpose” or “bathroom” disinfectant cleaner to mist the entire toilet. Make sure to get both the top and bottom of the seat and the entire exterior of the bowl, including its base. Use light pressure with a cloth or paper towel to work in and wipe away the cleaner.
Clean the handle thoroughly. The handle needs to be extra-clean because you touch it every time you use the toilet. If it’s a breeding place for bacteria, that bacteria will be on your fingers after you flush! Be sure to give the handle a generous coat of disinfectant spray. You’re more likely to give yourself germs from the handle than you are from any other part of the toilet, so clean it well.
https://baranasanitary.com/wp-content/uploads/2019/01/How-to-Clean-a-Toilet-01.jpg7501150adminhttps://baranasanitary.com/wp-content/uploads/2017/01/logo-3.pngadmin2019-01-16 06:32:472019-01-07 06:58:15How to Clean a Toilet?
Bathroomsinks get a lot of use. Not only do you use them in the morning to get ready for work or school, but you use them throughout the day. Because of this, your bathroomsink may accumulate a lot of dirt and grime. Thankfully, there are many ways to effectively clean your bathroomsink. By doing routine cleans, taking steps to remove tough stains, and taking steps to keep your sink clean every day, you’ll have a cleaner bathroom.
Wipe down the sink. Take a clean, wet cotton cloth or dish sponge and wipe down the interior of the sink. Try to get as much debris and grime as you can. Make sure to wipe around the drain. If your sink is especially dirty, you may need to switch out for a fresh cloth. In many cases, it is best to wipe the sink down when it is dry, so you’ll be able to remove hair, grime, and other debris easily. Wipe down the sink on a daily basis, if needed.
Rinse the sink. Make sure to rinse the sink before you use a bathroom cleaning product. If you don’t rinse the sink, you’ll have to contend with a lot of dirt when you spray the sink down. Turn on the faucet and run hot water into the sink. Hot water will loosen soap scum, grime, and dirt. Splash the water around the surface – including the sides – of the sink. You may need to use a clean cotton cloth to wipe down the sides of the sink with hot water.
Spray the sink with a cleaner. Choose a bathroom cleaner of your choice and liberally spray the sink. Make sure to get all parts of the sink, including the faucet and behind the faucet. Most bathroom cleaners are formulated to clean bathroomsinks. You may be able to use a tub and tile cleaner or a cleaner formulated for the type of material you sink is made of. In most cases, this is porcelain. Make sure the cleaner is a disinfectant. This is important as bathroom sinks can potentially accumulate a variety of germs.
Wipe the sink. After spraying your cleaner, take a clean cloth and wipe down the entire surface of your sink. Pay special attention to especially dirty areas and apply pressure when you need. You may need to use several clean cloths. If you need to spray more cleaner while you’re wiping the sink down, do so.
Sprinkle baking soda. If your bathroomsink is still dirty after you’ve done a light clean, you should sprinkle baking all over the sink. Cover as much of the surface as you can. The abrasive force of the baking soda will help remove tough stains. Make sure the sink is dry before you sprinkle the baking soda. Use as much baking soda as you need to cover the surface area of the sink. Take care to sprinkle some baking soda into the grout ring around the drain.
Scrub the sink. Take a clean cloth and scrub the sink down. You may have to apply a lot of pressure in areas that are particularly dirty. Without scrubbing your baking soda into the sink, you won’t be able to remove all stains. Swirl your cloth around in circles while you rub the baking soda into the surface of the sink. Consider using a regular cotton cloth. Microfiber may not have the abrasive power you need to remove some stains. In some instances, you may need to use a mildly abrasive dish sponge.
Rinse the sink. After you’ve scrubbed the sink, you need to thoroughly rinse it to remove all leftover baking soda. If you don’t rinse it immediately, some of the stains may re-set and all your work will be wasted. Make sure to run the water until all the baking soda has washed down the drain. If your sink doesn’t drain properly, you may need to wipe the baking soda out with cloth rags or paper towels.
https://baranasanitary.com/wp-content/uploads/2018/09/How-to-Clean-a-Bathroom-Sink-900600.jpg600900adminhttps://baranasanitary.com/wp-content/uploads/2017/01/logo-3.pngadmin2018-09-17 06:54:082019-08-21 06:55:36How to Clean a Bathroom Sink?
