Posts

How Removing your Stuck Shower Head?

/in /by


Use a wrench or pair of pliers to remove the shower head. Often, you can rely on simple tools, such as wrenches or pliers, to loosen your stuck shower head. When one method does not work, try the next method. Cover the fixture’s connector or plumbing nut with an old cloth to protect the metal. Grip the connector or nut with a wrench or pair of locking pliers.


First, turn the wrench or pliers clockwise in an attempt to break the rust or mineral deposits. Turn the tool counterclockwise to loosen and remove the shower head. Apply a rust, calcium, and lime remover to the shower head. Treating the rust and mineral build-up with chemicals may loosen the connector or nut.


Read the instructions on the bottle of rust, calcium, and lime remover. Apply the product as instructed. Allow the product to sit for the allotted time. Scrub off the product with a wire brush, removing the rust, calcium, and lime in the process. Wipe the shower head and shower arm clean.


Apply penetrating lubricant to the shower head. Penetrating lubricants, like WD-40 and Liquid Wrench, can work wonders on a stuck shower head. Apply one coat of the penetrating lubricant to the connector or nut. Allow it to sit for two hours. Apply a second coat of the penetrating lubricant to the connector or nut. Allow it to sit for two hours.


Cover the connector or nut with a cloth. Grip the fixture or nut with a wrench and attempt to loosen the shower head. Consult your kit’s directions for the exact drying time for your specific finish. If you don’t let the finish dry long enough, you could end up with streaks and bubbles in the new coating and you will need to start the process over again.

How to Cleaning Area Around Toilet?

/in /by

Cleaning a toilet is a task that often gets postponed, but it’s essential to keep toilets clean. A dirty toilet will look bad, smell bad and breed germs. However, as with many of life’s less pleasant tasks, cleaning your toilet now can save you headaches later. With these instructions, you’ll get through this task quickly and efficiently.

Remove items from atop and around the toilet. Before you begin, clear the toilet of things that may obstruct you while cleaning – tissue boxes, photos, etc.. Because you want to give the toilet a thorough cleaning, you’ll need to be able to reach every nook and cranny. Clearing items away from the toilet won’t just allow you to clean under and around them – it will keep them out of the way, safe from harmful cleaners, and will prevent any accidental drops into the toilet.

Rinse or dust the items that were on or around the toilet. You don’t want to make your sparkling clean toilet impure by transferring dust onto it from an unclean picture frame or tissue box. Put on clean gloves, then give the items that were on or around the toilet a quick clean.

Wet and lightly scrub them if they’re waterproof, or, if they’re not, just give them a quick pass with a brush. Wipe the items clean with a paper towel and put them back in their places. When you’ve finished, take your gloves off and wash your hands as a precaution against the spread of bacteria.

Spray the floor around the toilet with the disinfectant spray. Often, if your toilet‘s dirty, the floor around it is too. You don’t want to get your feet dirty every time you use the toilet, so take the opportunity to clean the surrounding section of floor. Use a brush or broom to sweep up any loose hair or debris around, and especially behind, the body of the toilet. Wipe the area clean with wet paper towels, disposable wipes, or a cloth.