Posts

How Applying the New Finish?


Apply the new finish over the tub in smooth, even rows. If you are using a spray on finish, hold the can about 12 inches (30 cm) from the tub and apply it from left to right. Don’t back track, instead, keep spraying it from left to right in the same direction to create even, overlapping coats. If you are painting the finish on, roll it in one direction for the same reasons.


Apply one coat of the finish, taking your time to ensure you cover every bit of the tub with an even layer. Do not touch the finish after you lay it on or it may create permanent marks. Give the finish 15 minutes to dry. You’ll be applying additional coats of the glaze or finish to the tub, but each coat needs a few minutes to cure before applying the next.


If it’s a particularly humid day or your bathroom isn’t well ventilated, you may want to wait a little bit longer. Letting each coat dry slightly before applying the next will help them better seal and adhere to one another. Add 2 more coats, waiting 15 minutes between each. You should have a total of three coats applied to your tub before you’re done, though each coat does not need to be completely dry before applying the next one.


Waiting 15 minutes should make the previous coat tacky enough to adhere to the next. Apply each coat in the same, smooth, left to right fashion whether painting or spraying. Make sure you cover the entire tub with each coat. Give the tub at least a day to dry. Don’t run any water through the tub or attempt to touch the new finish for at least one full day.


Keep the doors and windows open with the fan running if possible to keep the area ventilated and aid in the drying process. Don’t let anyone use the toilet in the bathroom while it dries as the fumes can still be dangerous. Remove the tape and plastic. With the tub mostly dry, you can now remove all of the plastic, tape and paper you used to protect the walls and hardware in your tub.

How Making a Mold Removal Solution to Remove Bathroom Mold?

Create a vinegar solution for a safe, non-toxic mold killer. White vinegar is a great way to remove mold from a variety of different surfaces. Pour the vinegar directly into a spray bottle to use it. It doesn’t need to be diluted at all, as it is the most effective when it isn’t watered down. You don’t need to rinse away the vinegar after you have used it.

Although the smell can be unpleasant, it usually clears within 1-2 hours. You can open a window or turn on a fan to help the smell disappear faster.

Use a Borax solution for a natural mold remover. Borax is a natural insecticide and fungicide. Mix together 1 cup (204 g) of Borax with 1 US gal (3.8 L)of water and then pour the solution into a spray bottle. Simply spray the solution directly on the surface you want to clean. Borax doesn’t need to be rinsed off, as it can prevent more mold from growing in the future.

You can find Borax in the laundry section of grocery stores. It is a white mineral powder. Borax is dangerous to consume, but unlike bleach, it doesn’t release toxic fumes.

Choose a bleach solution as a last resort. Although bleach is effective at killing mold on non-porous surfaces such as showers, basins, and tiles, it is a toxic substance and needs to be used carefully. Create a bleach solution with 1 part bleach to 10 parts water and place this into a spray bottle. You don’t need to rinse the bleach solution away afterward unless pets or small children might touch the surface. Always wear gloves when working with bleach and keep the area well-ventilated to avoid inhaling the fumes.