Posts

How does the bathroom be anti-seepage and mildew?

The walls of the bathroom are mostly paved with tiles. In order to keep them clean and bright, you can use multifunctional decontamination cream to clean them. As for bathroom tiles crevice, first use toothbrush to dip a little decontamination cream to remove dirt, then brush with a brush at the gap. This can not only prevent seepage, but also prevent the growth of mould.

A clever way to clean the bathroom glass basin. The glossy mirror and windows will be blurred because of their close contact with water for a long time. A spray type glass basin cleaner can be used to spray a large X shape on a whole glass, then fold the dry rags and wipe one round in one direction until the glass seven points dry, then wipe it again with a dry cloth. It can also be wiped with old newspapers. The ink of paper can make the glass shine as early as possible and wipe away stubborn dirt.

The faucet is perfectly change cloth. Water faucets often dip into various baths, shampoos, and detergent, which will make the surface of the faucet chrome plated. You can spray neutral deter gent on soft cloth and gently wipe the faucet once a week. Do not use acid or abrasive cleaners or wire brushes to “torture” faucets.

Make a whitening mask for the toilet. First, put a proper amount of water in the toilet, rinse the toilet brush again, then pour about 5~10 milliliters of detergent or hydroelectric acid, then wash it evenly with a brush, if the dirt is heavy, then a little detergent can be soaked and washed until clean, then rinse with clean water.

Bathroom ceramics are as bright as new. There is also a convenient and environmentally friendly way to clean sanitary ware, which is white vinegar and lemon peel. First, clean the dirt on the surface of the sanitary ware, then dip the soft cloth into a little white vinegar to wipe the surface of the sanitary ware or wipe with the lemon peel. Only a little time, the clean will be bright as new, and it will send out the fragrance.

Create a “oxygen bar” in the room. Today, “negative ion” air, you can keep some of the shade of plants, you can also buy a kind of oxygen bar, an oxygen bar similar to the murals can play the role of fresh air and plants, and do not take care, but also decorate the bathroom room, let the bathroom room “oxygen bar”, you may try.

Create an elegant fragrance. There are many kinds of air fresheners on the market, you can choose according to your own preferences. When using the bathroom in the elegant fragrance atmosphere, the music will be relaxed and comfortable at the same time. The simplest way to clean bathroom air is to put a cup of vinegar or a box of cool oil in the bathroom, and the smell will disappear.

toilet installation faq

Toilet Installation FAQ

toilet installation faq

Common problems and solutions of toilet installation

Question 1: after the toilet is installed, can not stand against the wall?

This is related to the selection of the toilet drain distance and the distance of the reserved blowdown pipe from the wall. Some toilet sewage discharge distance from 210mm, 305mm, 400mm three specifications. Under normal circumstances, allow the installation of size 190-210mm, 285-305mm, 380-400mm, that is to say the toilet back, 20mm away from the wall clearance, the purchase should be based on home reserved sewage pipe actual distance from the wall size control, allows the selection of toilet installation size specifications. If the sewage pipe from the wall distance is dead and not standardized, without proper drainage from the toilet when the choice, can buy 1 shifters to adjust. Shifter generally can increase or decrease the maximum distance of the center about 100mm.

Question two: how do you maintain the back of the toilet with a high back?

Toilet parts because of the more complex, and the use of high frequency, affected by water quality and so on. Generally install angle valve, hose, filter, to facilitate the daily maintenance of the toilet. Normally the inlet angle valve is mounted on the side of the toilet and 200mm high above the ground. For this kind of high back toilet, the angle valve is installed on the back of the toilet and is blocked by the toilet after installation. In order to facilitate maintenance, manufacturers in production, taking into account these reasons, usually in the lower part of the toilet, there are maintenance holes. Maintenance can enter the internal switch from the maintenance hole inlet angle valve, or from the upper part of the water tank to the water tank cover is opened or removed to repair, the complete set of product maintenance.

Question three: toilet drain button, press down, can not play or loose, why?

This is related to the quality of the product. It can not be played because the spring is not elastic and loose because it is not locked. Regular manufacturers of buttons, in the warranty period and the number of required use does not occur in this case. But some manufacturers of poor quality of production, the number of times and shelf life will be relatively short.