Posts

How Bleaching the Bathtub?


Open windows or bring in a fan before you begin working with bleach. If your bathroom is small and doesn’t have a vent or windows, bring in a fan to blow air out as you work. The most important thing is that you’re getting fresh air so you aren’t just breathing in bleach fumes. You can also wear a respirator if you’re concerned about the fumes.


Wear rubber gloves and mix 90% water with 10% bleach. Use a large bucket to mix the water and bleach. Leave some room at the top of the bucket so that it doesn’t spill easily. Make sure to wear gloves and old clothes, too. Fill up the bucket in the bathroom near the tub so you don’t have to try and transport it from another room.


Scrub the tub with the bleach and water solution and then rinse it out. Use a sponge and start at one corner of the tub and systematically work your way around it. Squeeze out and re-soak your sponge as much as you need to. Rinse the tub out with fresh water after you’ve cleaned it. You can dump out the bleach/water mixture and fill that same bucket with clean water if you want to.


Don’t forget to scrub the exterior of the tub, too—you’re going to be painting the entire thing, so it all needs to be cleaned. Part of the painting process involves getting the tub as clean as possible beforehand so that the paint adheres to the surface better.


Wash the tub with an abrasive cleaner to ensure it’s clean. Use a product like Comet and sprinkle it over the entire surface of the tub. Use a new, wet sponge to scrub the tub. Rinse out your sponge periodically so it doesn’t get too gunky from the cleaner, and then rinse the tub again with fresh water. If you don’t have Comet, you could sprinkle and scrub away baking soda for the same result.

How to Paint Bathroom Cabinets for Painting the Perfect Finish?

Mix the paint. Make sure your paint is thoroughly blended and free of clumps or separation. You can do this with an electric drill with a paint paddle attachment if the paint has been sitting in storage for a while, or simply give it a stir if you’re just bringing it home. The better the paint is mixed, the smoother coverage it will create. Oil based paints may separate more than other varieties. Do your blending outside and set down a few sheets of newspaper or cardboard to protect from splatters.

Apply the base coat. Paint cracks, crevices and other hard to reach spaces first, using a brush to give you greater control. Afterwards, go over flat, broad surfaces using a dense foam roller. Let the initial coat set up for a couple of hours before applying subsequent coats. Don’t worry too much about making the first coat flawless. You can cover up any visible imperfections with later coats.

Paint additional coats as needed. Most cabinets will require two to three coats for a seamless finish. For the final coat, use a steady hand and a consistent brushing pattern. Watch out for drips, as these can permanently settle into the complete finish once it dries. When you’re done, the your cabinets should have a rich, uniform appearance.

Use your best judgment after applying the base coat to decide how many follow-up coats will be necessary. Many new types of paint are self-leveling, which means they won’t run or clot as easily. Working with these paints can save you a lot of frustration in achieving the perfect finish, as well as additional mess during cleanup.

Allow the paint to dry completely. The paint will dry to the touch within 24-48 hours, though it may take up to a week for it to harden to the point that it becomes resistant to scuffs and other marks. Leave the doors open to provide air flow. Keep small children and pets away from wet paint as it dries. Leaving the fan running in the bathroom may help the paint set up at a faster rate.

Replace the doors and hardware. Once the cabinets are dry, reassemble the doors, put all hardware back into place and enjoy the newfound beauty and relaxation of your bathroom. Make sure the paint dries completely before installing the hardware or it will adhere to the paint.