Posts

How Removing your Stuck Shower Head?

/in /by


Use a wrench or pair of pliers to remove the shower head. Often, you can rely on simple tools, such as wrenches or pliers, to loosen your stuck shower head. When one method does not work, try the next method. Cover the fixture’s connector or plumbing nut with an old cloth to protect the metal. Grip the connector or nut with a wrench or pair of locking pliers.


First, turn the wrench or pliers clockwise in an attempt to break the rust or mineral deposits. Turn the tool counterclockwise to loosen and remove the shower head. Apply a rust, calcium, and lime remover to the shower head. Treating the rust and mineral build-up with chemicals may loosen the connector or nut.


Read the instructions on the bottle of rust, calcium, and lime remover. Apply the product as instructed. Allow the product to sit for the allotted time. Scrub off the product with a wire brush, removing the rust, calcium, and lime in the process. Wipe the shower head and shower arm clean.


Apply penetrating lubricant to the shower head. Penetrating lubricants, like WD-40 and Liquid Wrench, can work wonders on a stuck shower head. Apply one coat of the penetrating lubricant to the connector or nut. Allow it to sit for two hours. Apply a second coat of the penetrating lubricant to the connector or nut. Allow it to sit for two hours.


Cover the connector or nut with a cloth. Grip the fixture or nut with a wrench and attempt to loosen the shower head. Consult your kit’s directions for the exact drying time for your specific finish. If you don’t let the finish dry long enough, you could end up with streaks and bubbles in the new coating and you will need to start the process over again.

How Cleaning Bathroom Grout With Kitchen Remedies?

/in /by

Steam clean the grout. One effective and environmentally friendly way of cleaning grout is to attack it with a steam cleaner. Outfit your steam cleaner with a thin and pointed nozzle, and a brush attachment if it’s available. Aim the nozzle at the grout lines, apply continuous steam, and follow the grout lines with the steamer.

Even if the steam cleaner doesn’t get the grout perfectly clean, it will clean it somewhat, and help loosen the rest of the dirt and debris to make it easier to clean with other products. Attack it with baking soda and vinegar. Take two tablespoons (30 g) of baking soda and add enough water to make a thick paste. Dip a clean toothbrush or grout brush into the paste, and then use the toothbrush to scrub the grout with the paste.

For the best results, use a new toothbrush with hard bristles, and scrub the grout in a circular motion, rather than back and forth. When you have finished scrubbing the grout, use a spray bottle to spray the area with a half-and-half mixture of vinegar and water. Let it bubble for about half an hour. Use the toothbrush to scrub the baking soda paste and vinegar into the grout again. Rinse the area with clean water.

Move on to baking soda and hydrogen peroxide. In case the baking soda and vinegar mixture didn’t to the trick, try hydrogen peroxide instead of vinegar. Make a thin paste with baking soda and hydrogen peroxide, and use the toothbrush to scrub the paste into the grout. Pour on some additional peroxide if necessary. Rinse with warm water when you’re finished.

You should never mix vinegar and hydrogen peroxide, so clean the area well and wait a couple days before trying this method. If the hydrogen peroxide doesn’t remove all the dirt and grime, it will at least improve the appearance of the grout by removing stains, and will kill any mold that’s present.

Give borax and lemon juice a try. In a small bowl, mix together ¼ cup (63 g) borax, ½ teaspoon (3 ml) lemon oil, and enough liquid soap (such as Castile soap) to make a paste. Use your toothbrush to scrub the paste into the grout, and then rinse with warm water.