Posts

How to Clean a Marble Shower?

/in /by

A marble shower is an elegant and chic addition to anyone’s bathroom. Unfortunately, there are also drawbacks with marble, especially when you have to clean it. Marble is a porous rock that tends to absorb chemicals and dyes that are found in traditional cleaners. For this reason, many different things can end up ruining your shower’s sleek finish.


Luckily, if you use the right techniques and limit the chemicals you use when you clean, you can have a shiny marble shower that’s free of stains and dirt. Wipe down your shower after each use. It’s important that you wipe it clean after every use because the chemicals found in your soap may hurt the marble. Use a dry cotton rag or dishcloth to wipe the moisture from the walls and basin of your shower after you use it.


Get your shower walls completely dry. If you just dry your shower walls every day after you use it with a squeegee or a couple of microfiber towels, you will almost completely eliminate the need to have to clean your shower. It’s that leftover water that creates soap scum. If you’re not doing that, you’ll need to clean your shower about once a week to keep mildew and mold away.


Fill a spray bottle with warm water a tbsp (14.7 ml) of mild dish soap. Use regular warm water to fill a spray bottle and add a tbsp (14.7 ml) of non-abrasive, pH-neutral, dish soap into the bottle. Select an undyed dish soap that does not contain any abrasives like sand or stone, and that doesn’t contain any acids like citrus, lemon, or vinegar.

Black Diamond，Simple Green和Zep Marble Cleaner. It will say pH-neutral on the label of your dish soap. Conventional cleaners may contain acids that can damage the surface of your shower. There are specially made marble cleaners that you can purchase at department stores or online. Popular commercial marble sprays include Black Diamond, Simple Green, and Zep Marble Cleaner.

How Unclogging Your Shower Drain?

/in /by

Your shower may be where you go to get clean, but it can be a thriving haven for mildew and grime. Cleaning your shower can be a big job, but it’s worth it to have a fresh, clean shower. No matter how dirty your shower is, there is a strategy to clean each part.

Remove hair from the drain. Take apart a wire hanger or use a long, thin item such as a knitting hook. Grab a garbage can or a plastic bag to put the hair in. Then unscrew the cap on your drain or just reach in, depending on the style of your drain.

Pull the hair out and throw it away. Keep pulling the hair out until the drain is clear. Hair should be removed from drains on a weekly basis to keep your drains clear.

Apply a drain cleaner. You can opt for a commercial brand, or you can make your own by adding ¼ cup (59 milliliters) of ammonia to a quart (1 liter) of boiling water. Pour in the cleaner to dissolve any remaining clogs. Use a drain cleaner about once a month to prevent major clogs. With proper cleaning, your drains should continue to work well. If a drain becomes too clogged, you may need to call a plumber.

Rinse with hot water. Turn on the faucet and clear the drain with clean water. If the drain backs up again during rinsing, repeat the steps to remove the clog.