Posts

How Designing Your Tray?

/in /by


Decide what your tray will hold. First, think about what you intend to keep on your tray during baths and how much space each object will need. Make sure that you use a piece of lumber that is wide enough to hold everything. Allow extra space so nothing is sitting on the edge of the tray. For example: A 1” x 10” (2.5 x 25 cm) board should be wide enough to hold a book, candle, and glass with room to spare.


However, be aware that lumber sizes (such as 1” x 10”) refer to when the wood is freshly cut before it dries out and shrinks. So, if you have something wider than 10 inches that you want to place on your tray, you will need a wider board than a 1” x 10”. Choose how many layers of wood you will need. Decide between making a simple tray with no raised surfaces or one with holders for certain objects.


For the simplest tray, plan on using a single piece of lumber. Or, to minimize the risk of spilling stuff into the tub, purchase a second piece of equal size to create holders before attaching it to the base board. Alternately, you could rim the entire tray by screwing smaller pieces of lumber, like a 1” x 2” (2.5 x 5 cm), around all four edges of the base board instead of creating individual holders.


Line the tray with wood trim on each side 1 to 1.5 in (2.5 to 3.8 cm) wider than the tray to have an attractive raised lip. Use a piece of plexiglass as the base layer and a piece of wood the same size on top with holders cut into it. The plexiglass is easy to clean, waterproof, and it will protect the wood.


Measure your tub. Use a measuring tape to determine the width of your tub. Be sure to include the rim on either side, since this is where your tray will rest. Also double-check that the rim on either side is level with each other. Surround units (where the tub and the shower stall are all one unbroken piece) may incorporate designs without a level rim on the inside of the stall.

Does bathroom need shower room?

/in /by

Many people want to have a separate bathroom space, but because of the limited space in the bathroom, can only bathroom facilities and sanitary ware in one room. The shower room makes full use of the corner of the room, and clearly divides the shower area by fencing or glass, so there is a shower room.

Separation in dry and wet zone. With a shower room, the water won’t splash out when you shower with a sprinkler and wet the entire bathroom floor. Independent bath space. The toilets and toilet of basin buildings in China are mostly combined, so the installation of bathroom avoids mutual influence and facilitates daily life. Save space. Some household bathroom space is small, can not be installed bathtub, and shower room can save a lot of space.

Decorative insulation. Water vapor gathers in a narrow space, the heat will not quickly dissipate, people feel very warm, and the shower room can also play a decorative role in the bathroom. If you install a shower room, you should decide according to the size of your own bathroom. The shower room not only reduces the workload of cleaning after taking a bath, but also increases the service life of bathroom cabinet, bathroom door and other facilities.

Take care of trouble. If the shower room made of glass is not cleaned in time after bathing, it will soon form a layer of white water and alkali on the glass, which must be cleaned with professional cleaning agent. Bathing space is limited. The space of shower room is standard size generally, the shower room of common size is somewhat narrow for tall and burly person, touch glass wall or other place easily when bathing.

Bath curtain with waterproof strip, both economical and effective dry-wet separation, but remember to regularly refresh the bath curtain. The size of the glass partition needs to be measured by the designer, and the cutting work is handed over to the merchant, so the effect is very beautiful. Waterproof partition wall can not only ornament bathroom decoration, can also be separated from the wet and dry areas around, the overall effect is also very good.

The most important thing to install shower room is to see whether the bathroom area is suitable for installation. If the bathroom area is very small, the installation will make the bathroom look smaller, and its glass wall must be close to the bathtub, sink, etc., not easy to clean, it is better not to install.