How Using a Cleaning Cream Clean Shower Screen?

Buy a commercial cleaning cream. It doesn’t need to be expensive—a generic brand should suffice. Find a shower cream anywhere that sells cleaning supplies: home-and-garden stores, bathroom-supply stores, and some drugstores. Squeeze a bit into your hand or a cloth and spread it over the whole surface of the screen.

Don’t worry about ruining the surface—the cream doesn’t harm glass. Rub the cream all over the glass, and don’t feel that you need to rub too hard. If you have a marble shower, you should keep the cleaning cream away from the marble. Grab a damp/wet cloth and wipe off the cream. The cream will froth, and it might take a few attempts to wipe it all off—but you don’t need to scrub!

Dry the screen. Use a clean, dry towel (cloth or paper) to gently dry the shower screen so that the end result is evenly clean. Repeat the process for the tiles the tiles. If you’re worried about the surface of your tiles, you can put the cream onto a cloth instead, but it will take longer and more persistence.

Spray your shower screen with window cleaner and wipe with a squeegee. You can use any commercial window cleaner—for example, Windex. If you do not have a squeegee, consider using a sponge. First, rinse the surface. Get rid of any dirt that has collected on the surface of the shower screen. You can run water from shower over the screen to wash away dirt, or you can use an external water source.

Spray window cleaner on the surface, then lightly wipe it down with a paper towel. Squeegee the surface. Spray on another layer of your preferred window-cleaning solution, then go over the surface with the squeegee until it is perfectly clean. If there are any marks left after the squeegee, go over the surface with a dry paper towel. Don’t be afraid to scrub stubborn spots.

how to choose shower

How To Choose Shower

how to choose shower

First, see whether the surface coating is smooth and smooth.
Generally speaking, from the surface of the shower, the naked eye can see the more bright and delicate, the better the plating process.

Two, look at the merits of the material.
Most of the plastic used for ordinary showers, high-quality showers generally use copper tube, copper pipe percussion sound crisp, cast iron pipe sound muffled. Or you can hold the tube 2, 3 seconds after the release, such as pipe body mist lingering, it is very likely that the cast iron pipe, if left hand tube almost no change, basically you can determine copper.

Three, look at the shower switch spool material and service life.
Quality shower switch valve core is made by special process, high hardness ceramic made, the service life to meet the national standard of 200 thousand times.

Four, look at the sprinkler function.
Many showers in addition to a variety of water functions, there are energy-saving, self-cleaning, constant water temperature and other diversified functions, and some showers there are multiple sprinklers. According to the actual situation of their own, select the right function, the less function, of course, the lower the price.

Five, look at the intensity of irrigation.
This should be based on their own water pressure, and if the house adopts water tower and other equipment, the water pressure is low, low pressure sprinkler should be used to ensure that in low pressure circumstances, the sprinkler water has a certain degree of irrigation. Of course, under normal circumstances, the water pressure less than 1.5 kilograms in the most suitable shower use will cause pressure, water pressure is too small a shower, the shower can not be used normally.