Posts

How Using a Bleach Solution?

/in /by


Open the windows and doors in the area for ventilation. When using bleach, it’s always a good idea to create good ventilation. Try to open as many nearby windows as you can, particularly if there’s one in the bathroom. If there’s not a window in the bathroom, place a fan blowing air out of the bathroom toward an open window.


Put on gloves and goggles. Choose gloves that won’t let the mold through, such as rubber cleaning gloves or latex gloves. Don’t touch the mold with your hands. Similarly, goggles are a good idea, as you don’t want to flip mold spores into your eyes accidentally. You may also want to wear a dust mask that filters out mold. These precautions will also protect you from the bleach.


Mix 1 cup (0.24 L) of bleach into 1 gallon (3.8 L) of water. Measure out the water first, and then pour the bleach into the water. Use a spoon or a paint stick to stir it together so it is is well mixed. Try not to splash it as you’re stirring. Make sure you never mix bleach with ammonia, as it creates toxic gases.


If you prefer, you can start out with an antifungal cleaning solution that doesn’t contain ammonia, then follow up with bleach after you get most of the mold off. Dip a sponge or cloth into the bleach solution and scrub down the mold. Squeeze out the excess and begin scrubbing the moldy areas. Knock off as much mold as you can and dip the cloth or sponge back into the bleach solution as needed.


You can also rinse out the cloth in running water before dipping it back in the solution so you’re not returning as much mold to your cleaning solution. Use a scrubbing brush where the mold won’t come off. If you have areas where you’re having trouble removing the mold, dip a toothbrush or other scrubbing brush into the cleaning solution. Run it over the moldy areas, using a small circular motion to get the mold off.

How to Replace a Bathroom Faucet Handle?

/in /by

Sometimes the handle of a bathroom faucet is put on incorrectly so it doesn’t rest in the correct position when the faucet is off. Other times the faucet handle may crack, discolor or otherwise look old, while still functioning. In either of these cases, the faucet handle can be replaced with a new one, without replacing the rest of the faucet.

Turn off the water supply to the faucet. Look beneath the sink for a valve close to the wall on the same side as the handle you are replacing. If this is a single handle faucet, turn off both supplies. When you locate them, twist the water supply valve or valves tightly to the right.

Test the faucet to ensure no water comes out when the handle to be replaced is turned. Examine the cap or top of the handle. Typically faucet handles have a false top or cap. This may be a porcelain cap that reads “hot” or “cold,” or it may be a metal cap in the same finish as the rest of the handle. Use a flat head screwdriver to loosen the cap and pry it up.

Look at the area hidden beneath the cap for a screw. Use the appropriate screwdriver to loosen and remove this screw. Lift off the handle of the faucet from its stem. Look at the back of the escutcheon or decorative cover at the bottom of the handle. There should be a very small hole with an Allen key screw in the back. Use an Allen key to loosen and remove this screw.

Lift the escutcheon off of the counter. The interior valve of the faucet should now be visible. Place a new escutcheon over the valve. Line up the screw at the back and tighten it down so the escutcheon does not move. Place the handle over the top of the valve so it sits on the escutcheon. Twist it completely to the “on” position and back off to make sure it is positioned properly.

Insert a screw into the top of the handle and tighten it down. Place the cover or cap into the top of the handle. If the cap reads “hot”, “color” or another word, line this up to face you. Snap the cap down into the cap of the faucet. Turn on the water supply and test the handle.