1, before cleaning, pay attention to ventilation
2. Clean tool preparation
Before cleaning, ready to clean tools, generally need to use the tools of detergent, toilet brush, cloth, gloves, if necessary, can wear goggles or glasses is commonly used to prevent the liquid from splashing into the eyes.
Cleaning tools selection notice: toilet should use soft cloth clean, disable strong acid, strong carbon and decontamination powder clean, don’t use volatile agent, diluent and other cleaning, otherwise it will corrode glaze. Also, be careful not to use sharp brushes such as wire brushes and razor blades.
3. Clean the inner wall of toilet seat
Place the detergent around the inner wall of the toilet, and then cover the toilet for a few minutes. You can start cleaning the outside of the toilet seat during the period. After a few minutes, open the toilet cover, wash the closet with a toilet brush, especially the water outlet device inside the toilet, to focus on cleaning up. After cleaning, press the water outlet button, flush the toilet seat again with clean water, and rinse the toilet brush with water.
4. Clean the toilet and the outer circle
The toilet ring is the part that contacts with the human body, and the bacteria and the dirt that are absorbed and detained are the most. Therefore, when cleaning the toilet, it is important to clean the toilet. Can be wiped with a dishcloth on the wipe, if the set of gaskets, gaskets must be regularly cleaned, disinfected. As for the outside of the toilet, clean the toilet, the water tank, the flush button and the toilet edge. Clean the toilet and clean it. For some sanitary corners that are not easy to clean, use an old toothbrush to clean them.
The toilet should not be cleaned until the cleaning is done. It is also necessary to keep it clean in daily life. At the same time, when you use, you can pay attention to some conservation matters, the toilet seat, the use of more long-term, conducive to health.